(I must first start by apologizing if you've seen this post twice in 12hrs.. I've had problems here with my smtp; not sure it went well) Hello, I've been unable to access any partition on /dev/hda since I've compiled my own kernel 2.6.14.5 . I'm currently running 2.6.12-10. I want to get rid of initrd and compile my own kernels (I've done it for a long time, it's just that since Deb 3.0 rX I have been a bit lazy and let the OS install new ones when new ones were available). Now, on /dev/hda I have all my "foreign" OS partitions (ntfs and vfat filesystems, as well as UFS -for solaris). For the life of me, I can't see any pertinent changes between my two kernel configs (provided in attachments) that might give the slightest clue as to why kernel-2.6.12 (dpkg-provided) will mount /dev/hda* and why kernel-2.6.14.5 (user-compiled) won't. The console won't spew any error messages concerning the missing vfat partitions. If I manually try to mount them (say.. mount -t vfat /dev/hdb6 /mnt/temp-mountpoint), I get a "/dev/hda6 : device busy". So I guess it "knows" that /dev/hdb6 exists, right ? It's not a question of filesystems not being included in modules/kernel; there are vfat partitions on /dev/hdb and those are being seen and mounted. I insist on the fact that *everything* works just fine with 2.6.12 but not with 2.6.14.5. Anyhow.. I'm stumped, can't see why it won't go ok with 2.6.15.4, if anyone can help me out with the files attached, just go ahead, please :) Regards, and best wishes for 2k6 ! -- Jeff
Attachment:
config-2.6.12-10.gz
Description: GNU Zip compressed data
Attachment:
config-2.6.14.5.gz
Description: GNU Zip compressed data
Filesystem Type Size Used Avail Use% Mounted on /dev/hdb9 ext3 3.7G 245M 3.3G 7% / tmpfs tmpfs 752M 0 752M 0% /dev/shm tmpfs tmpfs 752M 14M 739M 2% /lib/modules/2.6.12-10-amd64-generic/volatile /dev/hdb1 ext3 89M 21M 63M 25% /boot /dev/hda5 vfat 33G 3.7G 29G 12% /media/apps /dev/hdb6 vfat 20G 7.8G 12G 40% /media/archives /dev/hdb5 vfat 24G 12G 12G 50% /media/films /dev/hda6 vfat 33G 512K 33G 1% /media/jeux /dev/hda7 vfat 32G 23G 9.4G 71% /media/mp3 /dev/hdb11 ext3 1.8G 8.1M 1.7G 1% /tmp /dev/hdb8 ext3 7.4G 4.1G 2.9G 59% /usr /dev/hdb10 ext3 2.8G 1.3G 1.4G 49% /var /dev/hdb13 ext3 9.2G 4.2G 4.6G 48% /usr/local /dev/hdb14 xfs 2.4G 222M 2.2G 10% /home /dev/hdb15 jfs 17G 3.3G 14G 21% /sharepoint /dev/hdb7 reiserfs 66G 22G 44G 34% /vmware
Filesystem Type Size Used Avail Use% Mounted on /dev/hdb9 ext3 3.7G 245M 3.3G 7% / tmpfs tmpfs 754M 0 754M 0% /dev/shm /dev/hdb1 ext3 89M 21M 63M 25% /boot /dev/hdb6 vfat 20G 7.8G 12G 40% /media/archives /dev/hdb5 vfat 24G 12G 12G 50% /media/films /dev/hdb11 ext3 1.8G 8.1M 1.7G 1% /tmp /dev/hdb8 ext3 7.4G 4.1G 2.9G 59% /usr /dev/hdb10 ext3 2.8G 1.3G 1.4G 48% /var /dev/hdb13 ext3 9.2G 4.2G 4.6G 48% /usr/local /dev/hdb14 xfs 2.4G 222M 2.2G 10% /home /dev/hdb15 jfs 17G 3.3G 14G 21% /sharepoint /dev/hdb7 reiserfs 66G 22G 44G 34% /vmware tmpfs tmpfs 10M 632K 9.4M 7% /dev
5>[ 0.000000] Kernel command line: root=/dev/hdb9 ro console=tty0 quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 2205.078 MHz processor. [ 16.860601] time.c: Using PIT/TSC based timekeeping. [ 16.862996] Console: colour VGA+ 80x25 [ 16.865996] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 16.870111] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.909465] Memory: 1538604k/1572544k available (1620k kernel code, 33356k reserved, 997k data, 136k init) [ 16.909511] Calibrating delay loop... 4325.37 BogoMIPS (lpj=2162688) [ 16.934535] Security Framework v1.0.0 initialized [ 16.934541] SELinux: Disabled at boot. [ 16.934551] Mount-cache hash table entries: 256 [ 16.934625] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 16.934627] CPU: L2 Cache: 512K (64 bytes/line) [ 16.934632] CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00 [ 16.934732] checking if image is initramfs... it is [ 17.274255] ACPI: Looking for DSDT in initrd... not found! [ 17.347515] not found! [ 17.363466] Using local APIC timer interrupts. [ 17.408782] Detected 12.528 MHz APIC timer. [ 17.408796] testing NMI watchdog ... OK. [ 17.418788] NET: Registered protocol family 16 [ 17.418810] ACPI: bus type pci registered [ 17.418817] PCI: Using configuration type 1 [ 17.418820] mtrr: v2.0 (20020519) [ 17.419084] ACPI: Subsystem revision 20050729 [ 17.424048] ACPI: Interpreter enabled [ 17.424050] ACPI: Using IOAPIC for interrupt routing [ 17.424865] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 17.424867] PCI: Probing PCI hardware (bus 00) [ 17.424889] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [ 17.427691] Boot video device is 0000:01:00.0 [ 17.440010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 17.440299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 17.445489] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 17.445673] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 17.445856] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 17.446049] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.446231] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.446415] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.446605] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.446791] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 17.446849] Linux Plug and Play Support v0.97 (c) Adam Belay [ 17.446856] pnp: PnP ACPI init [ 17.450787] pnp: PnP ACPI: found 14 devices [ 17.450871] usbcore: registered new driver usbfs [ 17.450888] usbcore: registered new driver hub [ 17.450918] PCI: Using ACPI for IRQ routing [ 17.450922] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 17.451021] agpgart: Detected AGP bridge 0 [ 17.457887] agpgart: AGP aperture is 128M @ 0xd0000000 [ 17.457901] PCI-DMA: Disabling IOMMU. [ 17.458674] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 17.458837] audit: initializing netlink socket (disabled) [ 17.458845] audit: initialized [ 17.458935] VFS: Disk quotas dquot_6.5.1 [ 17.458949] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 17.458985] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) [ 17.458988] devfs: boot_options: 0x0 [ 17.459010] Initializing Cryptographic API [ 17.472077] Linux agpgart interface v0.101 (c) Dave Jones [ 17.472142] PNP: PS/2 controller doesn't have AUX irq; using default 0xc [ 17.472146] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112 [ 17.472334] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 17.472346] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 17.472350] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 17.472460] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.472573] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 17.473900] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 17.473979] io scheduler noop registered [ 17.473997] io scheduler anticipatory registered [ 17.474001] io scheduler deadline registered [ 17.474007] io scheduler cfq registered [ 17.474264] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 17.474337] NET: Registered protocol family 2 [ 17.484007] IP: routing cache hash table of 16384 buckets, 128Kbytes [ 17.484322] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 17.487003] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 17.487669] TCP: Hash tables configured (established 262144 bind 65536) [ 17.487750] NET: Registered protocol family 8 [ 17.487752] NET: Registered protocol family 20 [ 17.487892] ACPI wakeup devices: [ 17.487894] PCI0 PS2K UAR1 MC97 USB1 USB2 USB3 USB4 ILAN [ 17.487899] ACPI: (supports S0 S1 S3 S4 S5) [ 17.488151] Freeing unused kernel memory: 136k freed [ 17.500090] vga16fb: initializing [ 17.500094] vga16fb: mapped to 0xffff8100000a0000 [ 17.608685] Console: switching to colour frame buffer device 80x30 [ 17.608690] fb0: VGA16 VGA frame buffer device [ 17.684660] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 18.630073] Capability LSM initialized [ 18.638141] NET: Registered protocol family 1 [ 18.648248] SCSI subsystem initialized [ 18.649281] libata version 1.11 loaded. [ 18.650189] sata_via version 1.1 [ 18.650207] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 [ 18.650216] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 4 [ 18.650243] sata_via(0000:00:0f.0): routed to hard irq line 4 [ 18.650289] ata1: SATA max UDMA/133 cmd 0xD800 ctl 0xD402 bmdma 0xC800 irq 20 [ 18.650307] ata2: SATA max UDMA/133 cmd 0xD000 ctl 0xCC02 bmdma 0xC808 irq 20 [ 18.850571] ata1: no device found (phy stat 00000000) [ 18.850574] scsi0 : sata_via [ 19.051367] ata2: no device found (phy stat 00000000) [ 19.051369] scsi1 : sata_via [ 19.058181] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.058194] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.058197] ACPI: bus type ide registered [ 19.065131] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 19.065152] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 [ 19.065158] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 4 [ 19.065184] VP_IDE: chipset revision 6 [ 19.065185] VP_IDE: not 100% native mode: will probe irqs later [ 19.065196] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 19.065208] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA [ 19.065218] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio [ 19.065227] Probing IDE interface ide0... [ 19.448062] hda: ST3120022A, ATA DISK drive [ 19.702804] hdb: Maxtor 6B160P0, ATA DISK drive [ 19.757310] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 19.757386] Probing IDE interface ide1... [ 20.547948] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive [ 20.854343] ide1 at 0x170-0x177,0x376 on irq 15 [ 20.854420] Probing IDE interface ide2... [ 21.366022] Probing IDE interface ide3... [ 21.877504] Probing IDE interface ide4... [ 22.388986] Probing IDE interface ide5... [ 22.903389] hda: max request size: 1024KiB [ 22.903807] hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) [ 22.903943] hda: cache flushes supported [ 22.904000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > [ 22.944677] hdb: max request size: 1024KiB [ 22.965504] hdb: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133) [ 22.967073] hdb: cache flushes supported [ 22.967099] /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 > [ 23.102190] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 23.102198] Uniform CD-ROM driver Revision: 3.20 [ 23.348325] Attempting manual resume [ 23.348482] swsusp: Suspend partition has wrong signature? [ 23.393638] USB Universal Host Controller Interface driver v2.2 [ 23.393698] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 23.393707] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 5 [ 23.393732] uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [ 23.455054] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 23.455067] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00 [ 23.455182] hub 1-0:1.0: USB hub found [ 23.455190] hub 1-0:1.0: 2 ports detected [ 23.457919] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 23.457923] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 5 [ 23.457944] uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) [ 23.519859] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 23.519864] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e000 [ 23.519949] hub 2-0:1.0: USB hub found [ 23.519956] hub 2-0:1.0: 2 ports detected [ 23.522849] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 23.522853] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 5 [ 23.522874] uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) [ 23.584795] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 23.584799] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400 [ 23.584883] hub 3-0:1.0: USB hub found [ 23.584890] hub 3-0:1.0: 2 ports detected [ 23.587783] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 23.587787] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 5 [ 23.587808] uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) [ 23.623736] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 23.649730] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 23.649734] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e800 [ 23.649819] hub 4-0:1.0: USB hub found [ 23.649826] hub 4-0:1.0: 2 ports detected [ 23.668714] PCI: Enabling device 0000:00:10.4 (0000 -> 0002) [ 23.668723] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 23.668729] PCI: Via IRQ fixup for 0000:00:10.4, from 0 to 5 [ 23.668760] ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 [ 23.668801] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 23.668810] ehci_hcd 0000:00:10.4: irq 21, io mem 0x60000000 [ 23.668845] ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [ 23.668917] hub 5-0:1.0: USB hub found [ 23.668924] hub 5-0:1.0: 8 ports detected [ 23.698537] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker [ 23.698576] PCI: Enabling device 0000:00:12.0 (0000 -> 0003) [ 23.698585] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 23.698593] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 7 [ 23.698614] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 23.698695] eth0: VIA Rhine II at 0x11000, 00:13:8f:13:85:bf, IRQ 23. [ 23.699408] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 24.883463] usb 1-1: new low speed USB device using uhci_hcd and address 3 [ 25.177163] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 25.728840] usbcore: registered new driver hiddev [ 25.765767] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop� 1.00] on usb-0000:00:10.0-1 [ 25.765774] usbcore: registered new driver usbhid [ 25.765776] drivers/usb/input/hid-core.c: v2.01:USB HID core driver [ 26.036955] ACPI: CPU0 (power states: C1[C1]) [ 26.365240] Attempting manual resume [ 26.365387] swsusp: Suspend partition has wrong signature? [ 26.381892] kjournald starting. Commit interval 5 seconds [ 26.381905] EXT3-fs: mounted filesystem with ordered data mode. [ 27.266497] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 29.592322] Adding 979924k swap on /dev/hdb12. Priority:-1 extents:1 [ 29.661962] EXT3 FS on hdb9, internal journal [ 32.981205] parport: PnPBIOS parport detected. [ 32.981337] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 33.064866] lp0: using parport0 (interrupt-driven). [ 33.074391] mice: PS/2 mouse device common for all mice [ 33.091312] Real Time Clock Driver v1.12 [ 33.133054] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [ 33.793423] cdrom: open failed. [ 35.464994] kjournald starting. Commit interval 5 seconds [ 35.465093] EXT3 FS on hdb1, internal journal [ 35.465099] EXT3-fs: mounted filesystem with ordered data mode. [ 35.961696] kjournald starting. Commit interval 5 seconds [ 35.961826] EXT3 FS on hdb11, internal journal [ 35.961832] EXT3-fs: mounted filesystem with ordered data mode. [ 36.023368] kjournald starting. Commit interval 5 seconds [ 36.023519] EXT3 FS on hdb8, internal journal [ 36.023525] EXT3-fs: mounted filesystem with ordered data mode. [ 36.110753] kjournald starting. Commit interval 5 seconds [ 36.110897] EXT3 FS on hdb10, internal journal [ 36.110900] EXT3-fs: mounted filesystem with ordered data mode. [ 36.195663] kjournald starting. Commit interval 5 seconds [ 36.195809] EXT3 FS on hdb13, internal journal [ 36.195812] EXT3-fs: mounted filesystem with ordered data mode. [ 36.232575] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 36.232690] SGI XFS Quota Management subsystem [ 36.287357] XFS mounting filesystem hdb14 [ 36.358046] Ending clean XFS mount for filesystem: hdb14 [ 36.364797] JFS: nTxBlock = 8192, nTxLock = 65536 [ 36.483662] ReiserFS: hdb7: found reiserfs format "3.6" with standard journal [ 40.708274] ReiserFS: hdb7: using ordered data mode [ 40.722477] ReiserFS: hdb7: journal params: device hdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 40.725458] ReiserFS: hdb7: checking transaction log (hdb7) [ 40.778815] ReiserFS: hdb7: Using r5 hash to sort names [ 42.523509] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 42.534140] shpchp: shpc_init : shpc_cap_offset == 0 [ 42.534153] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 43.300602] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 43.841331] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xc000, speed 1024kHz [ 45.836990] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0079 [ 45.842220] usbcore: registered new driver usblp [ 45.842227] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 45.990119] input: PC Speaker [ 46.047238] irda_init() [ 46.047263] NET: Registered protocol family 23 [ 46.135684] FDC 0 is a post-1991 82077 [ 46.685964] ts: Compaq touchscreen protocol output [ 47.962481] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 49.475129] NET: Registered protocol family 10 [ 49.475225] Disabled Privacy Extensions on device ffffffff8035a7c0(lo) [ 49.475355] IPv6 over IPv4 tunneling driver
le entries: 512 (order 0, 4096 bytes) [ 7.731223] Initializing Cryptographic API [ 7.732258] Linux agpgart interface v0.101 (c) Dave Jones [ 7.732328] PNP: No PS/2 controller found. Probing ports directly. [ 7.732516] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 7.732552] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.732556] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 7.732669] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 7.732749] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 7.732883] io scheduler noop registered [ 7.732891] io scheduler anticipatory registered [ 7.732895] io scheduler deadline registered [ 7.732902] io scheduler cfq registered [ 7.732904] HP CISS Driver (v 2.6.8) [ 7.732956] v2.3 : Micro Memory(tm) PCI memory board block driver [ 7.732974] MM: desc_per_page = 128 [ 7.733024] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 7.733028] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 7.733041] VP_IDE: IDE controller at PCI slot 0000:00:0f.1 [ 7.733065] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16 [ 7.733073] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 0 [ 7.733098] VP_IDE: chipset revision 6 [ 7.733099] VP_IDE: not 100% native mode: will probe irqs later [ 7.733109] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 7.733120] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA [ 7.733133] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio [ 7.733141] Probing IDE interface ide0... [ 8.118567] hda: ST3120022A, ATA DISK drive [ 8.373308] hdb: Maxtor 6B160P0, ATA DISK drive [ 8.427864] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 8.427911] Probing IDE interface ide1... [ 9.220450] hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive [ 9.527324] ide1 at 0x170-0x177,0x376 on irq 15 [ 9.527603] Probing IDE interface ide2... [ 10.039520] Probing IDE interface ide3... [ 10.552001] Probing IDE interface ide4... [ 11.064482] Probing IDE interface ide5... [ 11.576989] hda: max request size: 1024KiB [ 11.577434] hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) [ 11.577570] hda: cache flushes supported [ 11.577606] hda: hda1 hda2 < hda5 hda6 hda7 > [ 11.618267] hdb: max request size: 1024KiB [ 11.640408] hdb: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133) [ 11.641967] hdb: cache flushes supported [ 11.641990] hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 hdb12 hdb13 hdb14 hdb15 > [ 11.768686] mice: PS/2 mouse device common for all mice [ 11.768720] NET: Registered protocol family 2 [ 11.776811] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 11.777498] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 11.780161] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 11.780802] TCP: Hash tables configured (established 262144 bind 65536) [ 11.780805] TCP reno registered [ 11.780995] ACPI wakeup devices: [ 11.780997] PCI0 PS2K UAR1 MC97 USB1 USB2 USB3 USB4 ILAN [ 11.781002] ACPI: (supports S0 S1 S3 S4 S5) [ 11.793970] kjournald starting. Commit interval 5 seconds [ 11.793979] EXT3-fs: mounted filesystem with ordered data mode. [ 11.793988] VFS: Mounted root (ext3 filesystem) readonly. [ 11.794194] Freeing unused kernel memory: 140k freed [ 11.914095] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 12.339231] NET: Registered protocol family 1 [ 12.823063] md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 12.823068] md: bitmap version 3.39 [ 14.297351] Adding 979924k swap on /dev/hdb12. Priority:-1 extents:1 across:979924k [ 14.366011] EXT3 FS on hdb9, internal journal [ 15.200683] Real Time Clock Driver v1.12 [ 15.232385] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [ 16.627169] device-mapper: dm-linear: Device lookup failed [ 16.627195] device-mapper: error adding target to table [ 16.628794] device-mapper: dm-linear: Device lookup failed [ 16.628819] device-mapper: error adding target to table [ 16.630100] device-mapper: dm-linear: Device lookup failed [ 16.630126] device-mapper: error adding target to table [ 16.631634] device-mapper: dm-linear: Device lookup failed [ 16.631659] device-mapper: error adding target to table [ 16.633729] device-mapper: dm-linear: Device lookup failed [ 16.633753] device-mapper: error adding target to table [ 16.635473] device-mapper: dm-linear: Device lookup failed [ 16.635498] device-mapper: error adding target to table [ 16.637225] device-mapper: dm-linear: Device lookup failed [ 16.637251] device-mapper: error adding target to table [ 16.638976] device-mapper: dm-linear: Device lookup failed [ 16.639002] device-mapper: error adding target to table [ 16.668712] device-mapper: dm-linear: Device lookup failed [ 16.668739] device-mapper: error adding target to table [ 16.674581] device-mapper: dm-linear: Device lookup failed [ 16.674607] device-mapper: error adding target to table [ 16.676249] device-mapper: dm-linear: Device lookup failed [ 16.676275] device-mapper: error adding target to table [ 16.678016] device-mapper: dm-linear: Device lookup failed [ 16.678041] device-mapper: error adding target to table [ 16.679777] device-mapper: dm-linear: Device lookup failed [ 16.679825] device-mapper: error adding target to table [ 16.681515] device-mapper: dm-linear: Device lookup failed [ 16.681541] device-mapper: error adding target to table [ 16.686556] device-mapper: dm-linear: Device lookup failed [ 16.686581] device-mapper: error adding target to table [ 16.688336] device-mapper: dm-linear: Device lookup failed [ 16.688361] device-mapper: error adding target to table [ 16.690102] device-mapper: dm-linear: Device lookup failed [ 16.690129] device-mapper: error adding target to table [ 16.691839] device-mapper: dm-linear: Device lookup failed [ 16.691865] device-mapper: error adding target to table [ 16.791908] device-mapper: dm-linear: Device lookup failed [ 16.791935] device-mapper: error adding target to table [ 16.793836] device-mapper: dm-linear: Device lookup failed [ 16.793861] device-mapper: error adding target to table [ 16.795511] device-mapper: dm-linear: Device lookup failed [ 16.795536] device-mapper: error adding target to table [ 16.797202] device-mapper: dm-linear: Device lookup failed [ 16.797228] device-mapper: error adding target to table [ 16.798879] device-mapper: dm-linear: Device lookup failed [ 16.798904] device-mapper: error adding target to table [ 16.800524] device-mapper: dm-linear: Device lookup failed [ 16.800548] device-mapper: error adding target to table [ 16.804873] device-mapper: dm-linear: Device lookup failed [ 16.804898] device-mapper: error adding target to table [ 16.806618] device-mapper: dm-linear: Device lookup failed [ 16.806644] device-mapper: error adding target to table [ 16.809582] device-mapper: dm-linear: Device lookup failed [ 16.809608] device-mapper: error adding target to table [ 16.811355] device-mapper: dm-linear: Device lookup failed [ 16.811381] device-mapper: error adding target to table [ 16.876152] device-mapper: dm-linear: Device lookup failed [ 16.876177] device-mapper: error adding target to table [ 16.878449] device-mapper: dm-linear: Device lookup failed [ 16.878474] device-mapper: error adding target to table [ 16.880110] device-mapper: dm-linear: Device lookup failed [ 16.880135] device-mapper: error adding target to table [ 16.881797] device-mapper: dm-linear: Device lookup failed [ 16.881822] device-mapper: error adding target to table [ 16.883444] device-mapper: dm-linear: Device lookup failed [ 16.883470] device-mapper: error adding target to table [ 16.885110] device-mapper: dm-linear: Device lookup failed [ 16.885135] device-mapper: error adding target to table [ 16.886776] device-mapper: dm-linear: Device lookup failed [ 16.886802] device-mapper: error adding target to table [ 16.888524] device-mapper: dm-linear: Device lookup failed [ 16.888550] device-mapper: error adding target to table [ 16.890341] device-mapper: dm-linear: Device lookup failed [ 16.890367] device-mapper: error adding target to table [ 16.892101] device-mapper: dm-linear: Device lookup failed [ 16.892127] device-mapper: error adding target to table [ 16.942090] device-mapper: dm-linear: Device lookup failed [ 16.942116] device-mapper: error adding target to table [ 16.943741] device-mapper: dm-linear: Device lookup failed [ 16.943767] device-mapper: error adding target to table [ 16.945366] device-mapper: dm-linear: Device lookup failed [ 16.945391] device-mapper: error adding target to table [ 16.947036] device-mapper: dm-linear: Device lookup failed [ 16.947062] device-mapper: error adding target to table [ 16.948714] device-mapper: dm-linear: Device lookup failed [ 16.948739] device-mapper: error adding target to table [ 16.950309] device-mapper: dm-linear: Device lookup failed [ 16.950334] device-mapper: error adding target to table [ 16.952075] device-mapper: dm-linear: Device lookup failed [ 16.952101] device-mapper: error adding target to table [ 16.953830] device-mapper: dm-linear: Device lookup failed [ 16.953855] device-mapper: error adding target to table [ 16.955577] device-mapper: dm-linear: Device lookup failed [ 16.955602] device-mapper: error adding target to table [ 17.009375] device-mapper: dm-linear: Device lookup failed [ 17.009402] device-mapper: error adding target to table [ 17.500104] kjournald starting. Commit interval 5 seconds [ 17.500192] EXT3 FS on hdb1, internal journal [ 17.500197] EXT3-fs: mounted filesystem with ordered data mode. [ 17.763799] kjournald starting. Commit interval 5 seconds [ 17.763900] EXT3 FS on hdb11, internal journal [ 17.763904] EXT3-fs: mounted filesystem with ordered data mode. [ 17.840948] kjournald starting. Commit interval 5 seconds [ 17.841091] EXT3 FS on hdb8, internal journal [ 17.841094] EXT3-fs: mounted filesystem with ordered data mode. [ 17.912885] kjournald starting. Commit interval 5 seconds [ 17.913027] EXT3 FS on hdb10, internal journal [ 17.913029] EXT3-fs: mounted filesystem with ordered data mode. [ 18.014474] kjournald starting. Commit interval 5 seconds [ 18.014615] EXT3 FS on hdb13, internal journal [ 18.014617] EXT3-fs: mounted filesystem with ordered data mode. [ 18.067350] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 18.067478] SGI XFS Quota Management subsystem [ 18.097812] XFS mounting filesystem hdb14 [ 18.169161] Ending clean XFS mount for filesystem: hdb14 [ 18.241826] JFS: nTxBlock = 8192, nTxLock = 65536 [ 18.477148] ReiserFS: hdb7: found reiserfs format "3.6" with standard journal [ 22.892945] ReiserFS: hdb7: using ordered data mode [ 22.907110] ReiserFS: hdb7: journal params: device hdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 22.909941] ReiserFS: hdb7: checking transaction log (hdb7) [ 22.955170] ReiserFS: hdb7: Using r5 hash to sort names [ 25.109780] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 25.131865] shpchp: shpc_init : shpc_cap_offset == 0 [ 25.131880] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.238472] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 17 [ 27.467026] USB Universal Host Controller Interface driver v2.3 [ 27.470496] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 18 [ 27.470505] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 2 [ 27.470533] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 27.484098] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 27.484115] uhci_hcd 0000:00:10.0: irq 18, io base 0x0000dc00 [ 27.488588] hub 1-0:1.0: USB hub found [ 27.488606] hub 1-0:1.0: 2 ports detected [ 27.590043] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 18 [ 27.590050] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 2 [ 27.590077] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 27.591101] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 27.591111] uhci_hcd 0000:00:10.1: irq 18, io base 0x0000e000 [ 27.593333] hub 2-0:1.0: USB hub found [ 27.593350] hub 2-0:1.0: 2 ports detected [ 27.694712] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 18 [ 27.694719] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 2 [ 27.694745] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 27.695821] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 27.695832] uhci_hcd 0000:00:10.2: irq 18, io base 0x0000e400 [ 27.698067] hub 3-0:1.0: USB hub found [ 27.698084] hub 3-0:1.0: 2 ports detected [ 27.795572] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 27.802120] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 18 [ 27.802128] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 2 [ 27.802154] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 27.803186] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 27.803197] uhci_hcd 0000:00:10.3: irq 18, io base 0x0000e800 [ 27.812767] hub 4-0:1.0: USB hub found [ 27.812785] hub 4-0:1.0: 2 ports detected [ 28.254883] PCI: Enabling device 0000:00:10.4 (0000 -> 0002) [ 28.254892] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 18 [ 28.254897] PCI: Via IRQ fixup for 0000:00:10.4, from 0 to 2 [ 28.255282] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 28.268510] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 28.268522] ehci_hcd 0000:00:10.4: irq 18, io mem 0x70000000 [ 28.268569] ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [ 28.279168] usbcore: registered new driver hiddev [ 28.285796] hub 5-0:1.0: USB hub found [ 28.285814] hub 5-0:1.0: 8 ports detected [ 28.507151] usbcore: registered new driver usbhid [ 28.507157] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 28.562383] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker [ 28.565727] PCI: Enabling device 0000:00:12.0 (0000 -> 0003) [ 28.565740] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 19 [ 28.565771] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 3 [ 28.565793] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 28.568946] eth0: VIA Rhine II at 0x11000, 00:13:8f:13:85:bf, IRQ 19. [ 28.569660] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 28.714645] usb 1-1: USB disconnect, address 2 [ 29.335983] usb 1-1: new low speed USB device using uhci_hcd and address 3 [ 29.560012] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop� 1.00] on usb-0000:00:10.0-1 [ 29.648185] ts: Compaq touchscreen protocol output [ 29.765561] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 30.007540] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0079 [ 30.008543] usbcore: registered new driver usblp [ 30.008548] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 30.835790] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
# /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hdb9 / ext3 defaults,errors=remount-ro 0 1 /dev/hdb1 /boot ext3 defaults 0 2 /dev/hda5 /media/apps vfat users,gid=0,uid=0,fmask=0,dmask=0 0 0 /dev/hdb6 /media/archives vfat users,gid=0,uid=0,fmask=0,dmask=0 0 0 /dev/hdb5 /media/films vfat users,gid=0,uid=0,fmask=0,dmask=0 0 0 /dev/hda6 /media/jeux vfat users,gid=0,uid=0,fmask=0,dmask=0 0 0 /dev/hda7 /media/mp3 vfat users,gid=0,uid=0,fmask=0,dmask=0 0 0 /dev/hdb11 /tmp ext3 defaults 0 2 /dev/hdb8 /usr ext3 defaults 0 2 /dev/hdb10 /var ext3 defaults 0 2 /dev/hdb12 none swap sw 0 0 /dev/hdb13 /usr/local ext3 defaults 0 0 /dev/hdb14 /home xfs defaults 0 0 /dev/hdb15 /sharepoint jfs defaults 0 0 /dev/hdb7 /vmware reiserfs defaults 0 0 /dev/hdc /media/cdrom0 udf,iso9660 ro,user,noauto 0 0