[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Problems with cdrecord



Hello!

I have the following problem:
zolnott05:/usr/src/linux-2.6.12# cdrecord dev=/dev/hdc blank=fast
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.12
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'MATSHITA'
Identifikation : 'DVD-RAM UJ-830S '
Revision       : '1.02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO
cdrecord: Trying to use ultra high speed+ medium on a writer which is not
compatible with ultra high speed+ media.

michael@zolnott05:~$ hdparm -i /dev/hdc

/dev/hdc:

 Model=MATSHITADVD-RAM UJ-830S, FwRev=1.02, SerialNo=
 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=0kB, MaxMultSect=0
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 *udma2
 AdvancedPM=no
 Drive conforms to: device does not report version:

 * signifies the current active mode

What is going wrong. Using SID


CU        
         
  Michael  
          
--                                                       
           Michael Ott, e-mail: michael@zolnott.de, www.zolnott.de           
I am registered as user #275453 with the Linux Counter, http://counter.li.org.

Attachment: pgplKQ9uqavQI.pgp
Description: PGP signature


Reply to: