Re: Pinnacle pctv stereo no sound
Well finally I solved the problem. I downloaded kernel 2.6.12 from
http://kernel.org, compiled it and everithing works.
BTW, how can I see the debug output messages from a module?
On 7/18/05, Anders Breindahl <skrewz@skrewz.dk> wrote:
> On Monday 18 July 2005 08:47, L.V.Gandhi wrote:
> > On 7/17/05, Andras Lorincz <andras.lorincz@gmail.com> wrote:
> > > Hi,
> > >
> > > I'm using debian sarge with kernel 2.6.8. I have problem getting sound
> > > to work for my tv tuner which is Pinnacle Pctv stereo with saa7134
> > > chipset. I have the internal audio connector connected to Aux in on my
> > > sound card. I can get the picture but there is no sound, just a
> > > background noise. When installing the modules I do this:
> > >
> > > #modporbe bttv card=1
> > > #modprobe tuner type=5
> > > #modprobe saa7134
> > >
> > > Thanks in advance for your help.
> >
> > see the kmix/alsamixer for line. Whether it is turned on and vol is
> > atleast 50%
>
> Excuse me for reusing the thread.
> I am in some sort of the same problem. I have a cheap framegrabber-card
> (saa7134 insmod option card=37, exactly), and audio is supposed to be input
> to my via82xx-onboard soundcard.
> However, as a means of debugging, I tried putting my in-ear headphones into
> the audio-out-jack of the tunercard, and heard absolutely nothing. I tried
> started and stopping tvtime, seeing how saa7134's debugging output reported
> the audio to be unmuted and muted accordingly, but nothing helped.
>
> That's not supposed to happen, right? Normally, the output impedance of
> line-out-connections is close enough to that of a headphone-out, so one would
> expect to hear something. Or am I missing something?
>
> Regards, Anders Breindahl.
>
>
>
Reply to: