2 SCSI Controllers
Hello,
I have an Intel server se7501WV2 with on SCSI Controller on board and a second
one as an extra card.
Build in is an Adaptec AIC7902 Ultra320 (two channel), extra is an Adaptec
29320LP-R PCI Single U320 (Chip AIC-7901X). Both use the
same driver (aic79xx).
If both are installed I get SCSI errors like (messages):
Apr 11 14:20:41 localhost kernel: scsi0:0:0:0: Attempting to abort cmd f7531800:
0x28 0x0 0x 3a 0x28 0x5d 0xde 0x0 0x0 0x1 0x0
Apr 11 14:20:41 localhost kernel: Infinite interrupt loop, INTSTAT = 0scsi0: At
time of recovery, card was not paused
Apr 11 14:20:41 localhost kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins
<<<<<<<<<<<<<<<<<
Apr 11 14:20:41 localhost kernel: scsi0: Dumping Card State at program address
0x26 Mode 0x22
Apr 11 14:20:41 localhost kernel: Card was paused
Apr 11 14:20:41 localhost kernel: HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0]
SAVED_MODE[0x11]
Apr 11 14:20:41 localhost kernel: DFFSTAT[0x33] SCSISIGI[0x25] SCSIPHASE[0x0]
SCSIBUS[0x0]
Apr 11 14:20:41 localhost kernel: LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12]
SEQCTL0[0x0]
Apr 11 14:20:41 localhost kernel: SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0]
SSTAT0[0x10]
I don't know what is wrong with this configuration. System is Debian Sarge,
Kernel version is 2.4.27. I know that debian is not supported on Intel servers.
--
Yours
Henrik Kraft
Reply to: