|
Hi, I work with a 2.4 kernel… The following modules are loaded: Module
Size Used by Not tainted …….. sg
25180 0 loop
8440 0 (unused) sr_mod
12632 0 (unused) ide-detect
288 0 (unused) ide-scsi
9072 0 ide-cd
29120 0 cdrom
27588 0 [sr_mod ide-cd] ide-core
98392 0 [piix ide-detect ide-scsi ide-cd] ….. sd_mod
10380 14 (autoclean) aic7xxx
137560 7 (autoclean) scsi_mod
54392 5 (autoclean) [sg sr_mod ide-scsi sd_mod aic7xxx] unix
13936 9 (autoclean) … and the dmesg output is: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER,
Rev 6.2.36 …. ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx scsi1 : SCSI host adapter emulation for IDE ATAPI
devices ide2: ports already in use, skipping probe ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-cd: ignoring drive hda ide0: BM-DMA at 0xd800-0xd807,
BIOS settings: hda:DMA, hdb:pio …as hda is definetly my cd-writer… @Joachim: /proc/scsi contains: buero:~# ls -l -r /proc/scsi/ insgesamt 0 dr-xr-xr-x 2 root root 0 2005-05-06 08:41 sg -r--r--r-- 1 root root 0 2005-05-06 08:41 scsi dr-xr-xr-x 2 root root 0 2005-05-06 08:41
ide-scsi dr-xr-xr-x 2 root root 0 2005-05-06 08:41
aic7xxx buero:~# ls -l -R /proc/scsi/ /proc/scsi/: insgesamt 0 dr-xr-xr-x 2 root root 0 2005-05-06 08:41 aic7xxx dr-xr-xr-x 2 root root 0 2005-05-06 08:41
ide-scsi -r--r--r-- 1 root root 0 2005-05-06 08:41 scsi dr-xr-xr-x 2 root root 0 2005-05-06 08:41 sg /proc/scsi/aic7xxx: insgesamt 0 -rw-r--r-- 1 root root 0 2005-05-06 08:41 0 /proc/scsi/ide-scsi: insgesamt 0 -rw-r--r-- 1 root root 0 2005-05-06 08:41 1 /proc/scsi/sg: insgesamt 0 -rw-r--r-- 1 root root 0 2005-05-06 08:41
allow_dio -r--r--r-- 1 root root 0 2005-05-06 08:41 debug -rw-r--r-- 1 root root 0 2005-05-06 08:41
def_reserved_size -r--r--r-- 1 root root 0 2005-05-06 08:41
device_hdr -r--r--r-- 1 root root 0 2005-05-06 08:41
devices -r--r--r-- 1 root root 0 2005-05-06 08:41
device_strs -r--r--r-- 1 root root 0 2005-05-06 08:41
host_hdr -r--r--r-- 1 root root 0 2005-05-06 08:41 hosts -r--r--r-- 1 root root 0 2005-05-06 08:41
host_strs -r--r--r-- 1 root root 0 2005-05-06 08:41
version @peter: I can’t use 2.6 kernel right now, due
to dependency problems… Thanks for your help, Chris |