Screen resultion on i865G
Hi all,
I've installed Sarge on a Dell Optiplex GX270 at work, and everything is
running great except I can't get a decent refresh rate in X. In windows
I could set the resolution to 1152x867 (or something like that) with a
76Hz refresh rate which was kind on my eyes and gave me a decent amount
of screen real-estate, but I can't seem to do this under X at all (nor
even get past 60Hz at 1024x768).
I'm using the i810 driver with agpgart and dri. I've tried with
ModeLines as detected by Knoppix (which also fails to work at a decent
res) and without (leaving X to auto-detect) without any difference. The
only thing in my XFree86.0.log that sheds any light is the lines:
(II) I810(0): Monitor EDID v2 checksum failed
(II) I810(0): XFree86_DDC_EDID2_RAWDATA property may be bad
lspci lists my graphics card as:
0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated
Graphics Device (rev 02)
My monitor is a Sun CM751U (or SUN0564 from DDC).
Does anyone have any ideas? I'll provide my complete XFree86.0.log or
whatever if need be.
Many thanks,
Chris
Below is my XF86Config-4:
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "vnc"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "uk"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "false"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "i810"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
VendorName "SUN"
ModelName "SUN0564"
# HorizSync 30-60
# VertRefresh 50-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
Option "passwordFile" "/root/.vnc/passwd"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
--
Chris Boot
bootc@bootc.net
http://www.bootc.net/
Reply to: