hotplug, udev and usbkey question
When I insert a USB memkey I do not get the /dev/usbkey device created.
IIRC it did before one of the latest updates ...
Can anyone direct me to what should be done in the rules to fix this ?
Follows my syslog.
TIA,
Bob
Mar 10 15:00:46 localhost usb.agent[6898]: usb-storage: loaded
successfullyMar 10 15:00:46 localhost kernel: usb-storage: device found at 2
Mar 10 15:00:46 localhost kernel: usb-storage: waiting for device to
settle before scanning
Mar 10 15:00:51 localhost kernel: Vendor: Model: USB Flash
Memory Rev: 1.00
Mar 10 15:00:51 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 00
Mar 10 15:00:51 localhost kernel: usb-storage: device scan complete
Mar 10 15:00:51 localhost scsi.agent[7018]: disk at
/devices/pci0000:00/0000:00:1d.7/usb4/4-3/4-3:1.0/host0/target0:0:0/0:0:0:0
Mar 10 15:00:52 localhost kernel: SCSI device sda: 246272 512-byte hdwr
sectors
(126 MB)
Mar 10 15:00:52 localhost kernel: sda: assuming Write Enabled
Mar 10 15:00:52 localhost kernel: sda: assuming drive cache: write through
Mar 10 15:00:52 localhost kernel: SCSI device sda: 246272 512-byte hdwr
sectors
(126 MB)
Mar 10 15:00:52 localhost kernel: sda: assuming Write Enabled
Mar 10 15:00:52 localhost kernel: sda: assuming drive cache: write through
Mar 10 15:00:52 localhost kernel: sda: sda1
Mar 10 15:00:52 localhost kernel: Attached scsi removable disk sda at
scsi0, channel 0, id 0, lun 0
Mar 10 15:00:52 localhost udev[7047]: configured rule in
'/etc/udev/rules.d/z_hal-plugdev.rules[2]' applied, 'sda' becomes '%k'
Mar 10 15:00:52 localhost udev[7047]: creating device node '/dev/sda'
Mar 10 15:00:52 localhost udev[7065]: configured rule in
'/etc/udev/rules.d/z_hal-plugdev.rules[2]' applied, 'sda1' becomes '%k'
Mar 10 15:00:52 localhost udev[7065]: creating device node '/dev/sda1'
Reply to: