Re: Sound problem with Sarge (2.6.7) on IBM IntelliStation
On Wednesday 09 March 2005 17:14, cedric wrote:
> Hi,
> I recently installed Sarge on my computer. Everything work fine but the
> sound.
>
> I have the following log in syslog:
> Mar 9 22:17:57 localhost kernel: isapnp: Scanning for PnP cards...
> Mar 9 22:17:57 localhost kernel: isapnp: Card 'Crystal Audio'
> Mar 9 22:17:57 localhost kernel: isapnp: 1 Plug & Play card detected
> total
> Mar 9 22:17:57 localhost kernel: Serial: 8250/16550 driver $Revision:
> 1.90 $ 54 ports, IRQ sharing enabled
> Mar 9 22:17:57 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a
> 16550A
> Mar 9 22:17:57 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a
> 16550A
> [...]
> Mar 9 22:17:57 localhost kernel: ad1848: PnP reports 'Crystal Audio' at
> i/o 0x534, irq 5, dma 1, 0
> Mar 9 22:17:57 localhost kernel: cs4232: set synthio and synthirq to
> use the wavefront facilities.
> Mar 9 22:17:57 localhost kernel: cs4232: probe of 01:01.00 failed with
> error -16
> Mar 9 22:17:57 localhost kernel: cs4232: Must set io, irq and dma.
>
> The "standard" beep work when I'm in a terminal window but I can't get
> playing any other sound under Gnome.
>
> Could anybody help me? I don't know what to do and where to search...
> Regards
> Cedric
Cedric, try this please:
check the permissions for the /dev/audio and /dev/mixer, they should
allow permission to "EXECUTE" for both owner and group
check you are "addgroup <username> audio (you should already be
permitted)
# alsaconf
simple follow the instructions on screen
open your multimedia mixer (gmixer or amixer or etc. - whichever
you are using) and select all controls to max and ESPECIALLY check that NO
mute boxes are checked.
this may solve your problem
Don
Reply to: