Re: Re: Re: HP USB Mass Storage device issue
btw, Thanks for your help.
The card in question is the following:
http://h30094.www3.hp.com/product.asp?sku=2418932&jumpid=ex_r2910_frooglesmb/accessories
Not sure if the same version but same looking/idea.
The only thing under /sys/bus/scsi is my SATA drive I think
act:/home/atippett# cat /sys/bus/scsi/devices/0\:0\:0\:0/vendor
ATA
I don't have a /sys/bus/scsi/drivers/sd/ file
Here's a tail of my syslog as the device is inserted. To answer your
question, I don't see SCSI listing out the hdwr sectors or device
information:
Feb 27 15:14:46 act kernel: usb 2-2: new full speed USB device using
ohci_hcd and address 5
Feb 27 15:14:46 act kernel: scsi5 : SCSI emulation for USB Mass Storage
devices
Feb 27 15:14:46 act kernel: usb-storage: device found at 5
Feb 27 15:14:46 act kernel: usb-storage: waiting for device to settle
before scanning
Feb 27 15:14:46 act usb.agent[18273]: usb-storage: already loaded
Feb 27 15:14:51 act kernel: Vendor: HP Model: Digital Drive
Rev: 1.00
Feb 27 15:14:51 act kernel: Type: Direct-Access
ANSI SCSI revision: 00
Feb 27 15:14:51 act kernel: Attached scsi removable disk sdb at scsi5,
channel 0, id 0, lun 0
Feb 27 15:14:51 act kernel: usb-storage: device scan complete
Feb 27 15:14:51 act scsi.agent[18330]: disk at
/devices/pci0000:00/0000:00:02.1/usb2/2-2/2-2:1.0/host5/target5:0:0/5:0:0:0
Feb 27 15:14:51 act udev[18340]: configured rule in
'/etc/udev/rules.d/z_hal-plugdev.rules[2]' applied, 'sdb' becomes '%k'
Feb 27 15:14:51 act udev[18340]: creating device node '/dev/sdb'
Reply to: