Re: cloning hard disk
Hi;
I have some problem regarding installing Redhat
ES(3.0) on prolient server DL380 it is not detecting
scsi controller. In that case can i install Linux on
IDE and then upgrade the kernel(which will detect the
scsi) and then copy the data from IDE to SCSI?
Will the procedure of copy (script descibed below)
work for IDE to SCSI ? or any additional steps
needed?
I am really sorry for posting this here but i am a
Debian user ..only due to customer insistence i have
to install RHL and i know i will get more sensible
answers to my technical questions here than on
Redhat.
Thanks and Regards;
Rituraj
--- Blake Swadling <blake@swadling.com> wrote:
> On Sun, 2005-02-13 at 21:12 -0700, Allasso Travesser
> wrote:
> > Hello,
> >
> > I would like to clone my Debian Woody system onto
> a second larger hard disk.
> > It seems to me that it would just be a matter of
> cleaning off the second
> > disk, partioning using fdisk, and then running:
> >
> > dd if=/dev/hdc of=/dev/hda
> >
> > where hdc is the drive from which I am copying my
> current system, and hda is
> > the drive I want to put this system on.
> >
> > current hdc partition table (2 Gb disk):
> >
> > Device Boot Start End Blocks Id System
> > /dev/hdc1 1 13 52384+ 83 Linux
> > /dev/hdc2 14 449
> 1757952 83 Linux
> > /dev/hdc3 450 523
> 298368 82 Linux swap
> >
> > How I plan to partition hda (30 Gb disk):
> >
> > Device Boot Start End Blocks Id System
> > /dev/hda1 1 13 52384 83 Linux
> > /dev/hda2 14 3704
> 29647957+ 83 Linux
> > /dev/hda3 3705 523
> 298368 82 Linux swap
> >
> > Can anyone see anything wrong with this, or would
> you tell me anything I
> > should watch out for? Anything I should find out
> about my current system
> > first? It seems that this could be fatal if it is
> not done right.
> >
> > Thank you, Allasso
>
> We routinely clone hard drives by doing a simple cp.
>
> make the filesystem, cp the files, then reinstall
> the bootloader
>
> I have attached an older script that has lilo stuff
> in it (I can't post
> the newer ones). We tend to do the chroot and lilo
> bit manually as we
> feel safer that way.
>
> works very nicely every time
>
> Cheers
> Blake
>
> ----------------------------- clone.sh
> --------------------------------
> !/bin/bash
> mke2fs -j -L /boot /dev/hdc1
> mke2fs -j -L / /dev/hdc2
> mke2fs -j -L /home /dev/hdc4
> mkswap -f /dev/hdc3
> mount -t ext3 /dev/hdc2 /mnt/clone
> cp -axv / /mnt/clone
> mount -t ext3 /dev/hdc1 /mnt/clone/boot
> cp -axv /boot /mnt/clone
> mount -t ext3 /dev/hdc4 /mnt/clone/home
> cp -axv /home /mnt/clone
> cd /mnt/clone
> #chroot .
> #sbin/lilo -C /etc/lilo.conf.hdc
> #exit
>
-----------------------------------------------------------------------
>
> --
> Blake Swadling <blake@swadling.com>
> Swadling.com
>
>
> --
> To UNSUBSCRIBE, email to
> debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
>
>
__________________________________
Do you Yahoo!?
Yahoo! Mail - Easier than ever with enhanced search. Learn more.
http://info.mail.yahoo.com/mail_250
Reply to: