Re: Re[2]: What can make DNS lookups slow?
hi ya chrsi
On Fri, 14 Jan 2005, Chris Evans wrote:
> resolv.conf:
> nameserver 213.120.62.97
> nameserver 213.120.62.98
i assume your gateway 217.34.100.198 can ping the above 2 ip#
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 217.34.100.194 0.0.0.0 255.255.255.255 UH 0 0 0 eth2
> 217.34.100.192 0.0.0.0 255.255.255.248 U 0 0 0 eth0
the above might be bad... to have those ip# going to 2 different ethernets
> 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
good since its the "2.0" network
> 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
good since its the "1.0" network
> 0.0.0.0 217.34.100.198 0.0.0.0 UG 0 0 0 eth0
good cause eth0 is the way to get out to the world ??
so anything on eth2 ( 192.168.2.xx ) will have occasional "slow problems"
( aka timeout )
but everything on eth1 ( 192.168.1.x ) seems fine ??
c ya
alvin
Reply to: