Re: acpi errors
On Fri, 2004-12-31 at 16:35, Eric Gaumer wrote:
> On Fri, 2004-12-31 at 13:42 +0000, michael wrote:
> > Can anybody tell me if errors of the form
> >
> > Dec 31 12:54:47 localhost kernel: ACPI-1133: *** Error: Method
> > execution failed [\_SB_.PCI0._CRS] (Node f7ff5720), AE_NOT_EXIST
> >
> > are important or can I just ignore them (full dmesg errors below)? I'm
> > running the 2.4.27-1-686-smp kernel from backports on 'testing' and
> > these errors started today after I did an apt-get update/upgrade. I'm
> > not sure what other info will be of use and couldn't find a solution to
> > this on the web.
> > Ta, michael
> >
>
> The message means that the acpi code couldn't find the firmware table.
> Could hotplug be loading some acpi stuff that should be blacklisted? Is
> your BIOS blacklisted? You should see some acpi related info when you're
> booting up.
>
> Was this kernel running fine (no messages) prior to the update?
Yes, no problems before update/upgrade.
Here's the first part of dmesg - there seems to be a prob with ACPI
right near the top... not sure why... all help welcome (BTW things seem
to be working okay!)
0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
{snip... all IRQ 2..18}
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2992.4365 MHz.
..... host bus clock speed is 199.4956 MHz.
cpu: 0, clocks: 1994956, slice: 664985
CPU0<T0:1994944,T1:1329952,D:7,S:664985,C:1994956>
cpu: 1, clocks: 1994956, slice: 664985
CPU1<T0:1994944,T1:664960,D:14,S:664985,C:1994956>
checking TSC synchronization across CPUs: passed.
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
*** is the above line what I should expect???
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
{snip: more stuff about PCI}
PCI->APIC IRQ transform: (B4,I4,P0) -> 21
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4260 blocks [1 disk] into ram disk... -done.
Freeing initrd memory: 4260k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 124k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ide: late registration of driver.
ICH5: IDE controller at PCI slot 00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
ICH5: IDE controller at PCI slot 00:1f.2
ICH5: chipset revision 2
ICH5: 100% native mode on irq 18
ide2: BM-DMA at 0xd000-0xd007, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xd008-0xd00f, BIOS settings: hdg:pio, hdh:pio
hdc: SONY DVD RW DRU-710A, ATAPI CD/DVD-ROM drive
hde: WDC WD2500JD-00GBB0, ATA DISK drive
hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
blk: queue f88342f8, I/O limit 4095Mb (mask 0xffffffff)
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xd800-0xd807,0xd482 on irq 18
hde: attached ide-disk driver.
hde: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63,
UDMA(100)
Partition check:
/dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11
>
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 1951856k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,2), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
{snip: more file system stuff}
Intel(R) PRO/1000 Network Driver - version 5.2.52-k3
Copyright (c) 1999-2004 Intel Corporation.
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:1d.7 to 64
ehci_hcd 00:1d.7: PCI device 8086:25ad (Intel Corp.)
ehci_hcd 00:1d.7: irq 23, pci mem f8855c00
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:1d.7: enabled 64bit PCI DMA
PCI: cache line size of 128 is not supported by device 00:1d.7
ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 4 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node f7ff5720), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node f7ff5720), AE_NOT_EXIST
shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x6
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x6
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2K._STA] (Node f7ff99e0), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2K._STA] (Node f7ff99e0), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2M._STA] (Node f7ff9a80), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2M._STA] (Node f7ff9a80), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.SBRG.ENFG]
(Node f7ff9f20), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.SBRG.DSTA]
(Node f7ff73c0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.UAR1._STA] (Node f7ff9b60), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.UAR1._STA] (Node f7ff9b60), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.SBRG.ENFG]
(Node f7ff9f20), AE_NOT_EXIST
Reply to: