[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Kernel 2.6.8 won't boot

On Tue, 2005-01-04 at 02:16 +0700, Muhammad Reza wrote:
> debian:/usr/src/linux# lspci
> 0000:00:04.1 IDE interface: VIA Technologies, Inc. 
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)

This is a serial ATA chipset.


Make sure you have sata_via module listed in /etc/mkinitrd/modules and
then re-install the 2.6 kernel (this will create a new initrd image).

Then at boot time, edit grub so that root=/dev/sda1

I know 2.4 shows the drive as hda but 2.6 will see it as sda because
this is how libata works.

Eric Gaumer <gaumerel@ecs.fullerton.edu>

Attachment: signature.asc
Description: This is a digitally signed message part

Reply to: