[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: :SPAM: Re: 100Mbit Lan runs at sloow 417Kbs!!



What version of samba are you using ???
there is a problem with samba - slow performance.
try to use newer version of samba package.
or if you are already using the latest version of samba, verify smb.conf
file to adjust for better performance - try to adjust the socket options
parameter.

Marcos

On Thu, 2004-09-30 at 02:59, Adamo wrote:
> ive checked and the windows part i ok
> 
> 
> On Wed, 29 Sep 2004 14:37:31 -0400, Paul Tsai <paul@thirdaspect.net> wrote:
> > Jacob S wrote:
> > 
> > >On Wed, 29 Sep 2004 13:56:40 -0400
> > 
> > 
> > >Paul Tsai <paul@thirdaspect.net> wrote:
> > >
> > >
> > >
> > >>Zachary Rizer wrote:
> > >>
> > >>
> > >>
> > >>>--- Adamo <im2sexy4you@gmail.com> wrote:
> > >>>
> > >>>
> > >>>
> > >>>>oh sorry. i tryed tranfering over samba and SCP same
> > >>>>slow speed. on
> > >>>>the windows machine i used normal windows networking
> > >>>>SMB protocol.
> > >>>>The transfer is between to local machines one
> > >>>>windows the other debian.
> > >>>>
> > >>>>On Wed, 29 Sep 2004 09:56:28 -0700 (PDT), Zachary
> > >>>>Rizer
> > >>>><zrizer@yahoo.com> wrote:
> > >>>>
> > >>>>
> > >>>1) Try not to top-post.
> > >>>2) "Hi i had windows on this box before and the speed
> > >>>was above 3000Kbs i installed debian and now its a
> > >>>slow 417kbs."  Take your 30000Kbs, divide it by 8, you
> > >>>get 375KB/s.  Hint: 8bits = 1byte.  Debian is
> > >>>reporting the kiloBYTES per second (~417, as you
> > >>>reported), windows was reporting kiloBITS per second.
> > >>>
> > >>>
> > >>>
> > >>it looks like you are running your network half-duplexed though.  Use
> > >>full, you should get increases.
> > >>
> > >>
> > >
> > >Actually, re-read the output he posted from mii-tool, pasted below for
> > >convenience. It indicates he is in fact running 100Mbps full duplex
> > >already.
> > >
> > >
> > >
> > >>Output fra mii-tool:
> > >>eth0: negotiated 100baseTx-FD, link ok
> > >>
> > >>
> > >       ^^^^^^^^^^^^^^^^^^^^^^^
> > >
> > >
> > >>product info: vendor 00:00:00, model 0 rev 0
> > >>basic mode:   autonegotiation enabled
> > >>basic status: autonegotiation complete, link ok
> > >>capabilities: 100baseTx-FD 100baseTx-HD
> > >>
> > >>
> > >
> > >Jacob
> > >
> > >
> > >
> > >
> > Ah, Touche!
> > I did see that full duplex line, however, if all he is doing is
> > transfering data, he should be get approximately twice that on a full
> > duplex network.  it looks as if part of his network isn't on full.  I
> > could be wrong but it was just a suggestion (based on the performance).
> > Double check your windows drivers and make sure it's on in full.
> > 
> > 
> > Paul
> > 
> > --
> > To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> > 
> >
> 



Reply to: