Re: (sid) ACPI Errors on Boot (TP R40e)

[Riccardo Tortorici <riccardo.tortorici@email.it>]

I use lilo and I booted with the pci=routeirq option..  unfortunately 
nothing do not work the same...
How can I fix those errors but, most important thing, what the hell they 
are?

Andreas Janssen wrote:
> Hello
>
> Riccardo Tortorici (<riccardo.tortorici@email.it>) wrote:
>
>
> > during the boot sequence I have the following errors:
> > ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
> > at this point my laptop (IBM TP-R40e) freezes for about 2-3 seconds,
> > and then all is ok.
> > By the Way...regarding the irq 11. How can be possible all the devices
> > wants this holy irq 11? The output of lspci told me the 0000:00:02.0
> > device is "USB Controller: ALi Corporation USB 1.1 Controller (rev
> > 03)"  . I googlized myself and I found a possible solution:
> > Boot with pci=routeirq ... how can i do it?
>
>
> If you use lilo, append pci=routeirq (or pci=noacpi) to the boot prompt.
> If you use grub, press "e", select the kernel line, press "e" again,
> append the option, and press b.
>
> best regards
>  Andreas Janssen

--
- Riccardo Tortorici -
Linux Registered User #365170
Count yourself @ http://counter.li.org/ !
Proudly Running Debian GNU/Linux "Sid" - Linux Kernel 2.6.8.1
--
HTML email can be dangerous, is not always readable, wastes bandwidth 
and is simply not necessary please don't send them to me!
If you don't know what I'm talking about please read this:

http://www.georgedillon.com/web/netiquette.shtml