Re: Debian sarge - raid

[victor <victor@ambra.ro>]

The problem is like this:
One hdd has ext3 "partitions," the other hdd has "linux raid autodetect".
Could this be the rason for what is hapening?
But how can I sincronize these 2 hdd's(I don't want to format the hdd 
with ext3)?

Alvin Oga wrote:

> On Wed, 22 Sep 2004, victor wrote:
>
>  
>
> > The kernel is version 2.4.26.
> > The module md is loaded.
> > cat /proc/mdstat returns:
> > md2 : active raid1 ide/host0/bus1/target0/lun0/part7[1]
> >      44335744 blocks [2/1] [_U]
> >   
>
>
> sounds like oyu're missing the 1st disk
>       
>
> > md1 : active raid1 ide/host0/bus1/target0/lun0/part6[1]
> >      4882624 blocks [2/1] [_U]
> >   
>
>
> sounds like oyu're missing the 1st disk
>       
>
> > md0 : active raid1 ide/host0/bus1/target0/lun0/part5[1] 
> > ide/host0/bus1/target0/lun0/part1[0]
> >      4882624 blocks [2/2] [UU]
> >   
>
>
> sounds like the 1st disk worked... ( whacky )
>
>     - if the disk is bad ... all /dev/mdxx should look
>     the same ...
> did you do raidhotremove, raidhotadd of the /dev/hda from each 
> partition ( /dev/md0 ... /dev/md2 )
>
> c ya
> alvin
>
>
>
>