How to stop PCI probe of /deb/hdc at boot?
Running Sarge with Grub, Debian kernel image 2.6.8-k7-smp
I don't have anything attached to /dev/hdc or /dev/hdd
but they are getting probed none the less. Adds about an
extra 30 seconds to my boot process. Is there a way to stop
this?
hda: SONY CD-RW CRX220E1, ATAPI CD/DVD-ROM drive
hdb: ATAPI DVD-ROM 16X, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IRQ probe failed (0xffffbdfc)
hdc: IRQ probe failed (0xffffbdfc)
hdc: no response (status = 0x0a), resetting drive
hdc: IRQ probe failed (0xffffbdfc)
hdc: no response (status = 0x0a)
hdd: IRQ probe failed (0xffffbdfc)
hdd: IRQ probe failed (0xffffbdfc)
hdd: no response (status = 0x0a), resetting drive
hdd: IRQ probe failed (0xffffbdfc)
hdd: no response (status = 0x0a)
PDC20276: IDE controller at PCI slot 0000:02:08.0
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 18 (level, low) -> IRQ 193
PDC20276: chipset revision 1
PDC20276: 100% native mode on irq 193
ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:pio, hdh:pio
hde: WDC WD1200JB-00CRA1, ATA DISK drive
hdf: WDC WD1200JB-00CRA1, ATA DISK drive
ide2 at 0xa400-0xa407,0xa802 on irq 193
hde: max request size: 128KiB
hde: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63,
UDMA(100)
/dev/ide/host2/bus0/target0/lun0: p1 p2 p3
hdf: max request size: 128KiB
hdf: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63,
UDMA(100)
/dev/ide/host2/bus0/target1/lun0: p1 p2 p3
hdc: IRQ probe failed (0xffffbdfc)
hdc: IRQ probe failed (0xffffbdfc)
hdc: no response (status = 0x0a), resetting drive
hdc: IRQ probe failed (0xffffbdfc)
hdc: no response (status = 0x0a)
hdd: IRQ probe failed (0xffffbdfc)
hdd: IRQ probe failed (0xffffbdfc)
hdd: no response (status = 0x0a), resetting drive
hdd: IRQ probe failed (0xffffbdfc)
Reply to: