Re: enable duplex
Quoting Jacob Friis Larsen <jfl@list.idg.dk>:
> > Quick howto (but please read the documentation first):
> >
> > modprobe bonding miimon=250 mode=1
> > ifconfig bond0 10.100.20.230
> > ifenslave bond0 eth0 eth1
>
> Must the virtual interface use non global ip addresses or can I use
> global ones, and could I then have 3 accessable ip addresses?
No, this is an example from a server on an internal network. You can just as
well use 'real' addresses. If you have 3 public addresses, you can use them all
3, but only the one that is configured on the bonding interface will be
redundant.
> Thanks for your guide.
It's my pleasure :)
joost
DISCLAIMER
This e-mail and any attached files are confidential and may be legally privileged. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of this communication is strictly prohibited. If you have received this transmission in error please notify A.S.T.R.I.D. nv/sa immediately and then delete this e-mail.
Reply to: