Re: Debian Hangs
Vijaya S wrote:
Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory Controller Hub]
(rev 03)
0000:00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset
Graphics Controller] (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:01:04.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550
UART) (rev 01)
0000:01:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev
08)
What driver are you using for this NIC? There are two drivers that
_will_ drive it. One gave me shocking performance and numerous error
messages.
This one seems fine:
e100
Ny NIC is:
0000:00:0b.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 01)
I'm running 2.6.6 now, but I'm pretty sure I fixed the problem on 2.4.
Certainly I had the problem then.
0000:01:0a.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10)
0000:01:0a.1 Communication controller: C-Media Electronics Inc CM8738 (rev 10)
And frequently the eth0 goes down
When i reboot and run /sbin/ifup eth0 i get the following error
SIOCSIFADDR:No such device
SIOCSIFNETMASK: No such device
eth0: error while getting itnerface flags.
That suggests the driver's not recognising the NIC.
I doubt this eth0
Regards,
Vijaya
John Summerfield wrote:
Vijaya S wrote:
Hi all ,
A machine with Debian on it hangs suddenly for no reason.
Below are the snapshots of the file /var/log/syslog
I am not able to figure whats the reason.
The eth0 eepro100 goes down and after rebooting its fine.
But i doubted the line LOWMEM
Is that the reason or any other?
any ideas or suggestins?
--
Cheers
John
-- spambait
1aaaaaaa@computerdatasafe.com.au Z1aaaaaaa@computerdatasafe.com.au
Tourist pics http://portgeographe.environmentaldisasters.cds.merseine.nu/
Reply to: