[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RTL8139 Full Duplex with a non-modular kernel

Hi, I am after some advice for setting a RTL8139 NIC to 100MB full duplex on a non-modular kernel.


I can do this with a modular kernel, but am not sure how to go about it on a monolithic kernel. The mii-tool does not seem to support the rtl8139 driver installed with the 2.4.26 kernel and reports incorrectly that the card is already at 100baseT-FD… using rtl8139-diag shows the eeprom is set to 10baseT-HD but for the life of me cannot work out how to set it to 100baseT-FS (have tried rtl8139-diag –w –F 100baseT-FD without success).


Any advice will be much appreciated.






Reply to: