no eth0 after 2.2.20 -> 2.4.18
Please,
under 2.2.20 my 3c589 was working fine. lsmod reported:
Module Size Used by
lockd 41808 0 (autoclean) (unused)
sunrpc 57816 0 (autoclean) [lockd]
nls_cp437 3896 0 (autoclean)
3c589_cs 8544 1
ds 6432 2 [3c589_cs]
i82365 22672 2
pcmcia_core 45312 0 [3c589_cs ds i82365]
af_packet 6136 0 (unused)
But with 2.4.18 installed, ifconfig eth0 reports:
eth0: error fetching interface information: Device not found
under 2.4.18, lsmod gives:
Module Size Used by Not tainted
nls_cp437 4384 2 (autoclean)
msdos 4796 1 (autoclean)
fat 29272 0 (autoclean) [msdos]
floppy 45824 2 (autoclean)
3c589_cs 7972 0 (unused)
ds 6464 0 [3c589_cs]
yenta_socket 8384 2
pcmcia_core 39136 0 [3c589_cs ds yenta_socket]
apm 8956 1 (autoclean)
af_packet 11528 0 (unused)
rtc 5528 0 (autoclean)
unix 13316 11 (autoclean)
ide-disk 6624 2 (autoclean)
ide-probe-mod 8064 0 (autoclean)
ide-mod 130860 2 (autoclean) [ide-disk ide-probe-mod]
ext2 30592 1 (autoclean)
ext3 56736 0 (autoclean)
jbd 35048 0 (autoclean) [ext3]
/etc/network/interfaces has:
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
auto lo
iface lo inet loopback
iface eth0 inet static
address 150.126.17.5
netmask 255.255.255.0
network 150.126.17.0
broadcast 150.126.17.255
gateway 150.126.17.10
(I have to load yenta_socket, or modprobe whinges about unresolved
symbols - YES, I know this is a shot in the dark !)
modprobe i82365 finds a CS4237B _audio card_ and then dies with "no such
device" (perhaps this is unconnected)
stuck !
Joe Mc Cool
Reply to: