NEC2080UX+ - "Supported Future Video Modes"
Why are these modes of my LCD only "future" supported, according
to XFree86.0.log?:
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #4: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) RADEON(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): #6: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) RADEON(0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 162.0 MHz Image Size: 408 x 306 mm
(II) RADEON(0): h_active: 1600 h_sync: 1664 h_sync_end 1856
h_blank_end 2160 h_border: 0
(II) RADEON(0): v_active: 1200 v_sync: 1201 v_sync_end 1204
v_blanking: 1250 v_border: 0
(II) RADEON(0): Ranges: V min: 48 V max: 87 Hz, H min: 30 H max: 96
kHz, PixClock max 170 MHz
(II) RADEON(0): Monitor name: LCD2080UX+
(II) RADEON(0): Serial No: 44106076YB
(II) RADEON(0): End of Monitor2 EDID data --------------------
My real question: how do I get 1600x1200 (the native resolution) out of
this thing?
Anyone reading my previous X posts will note that I have Xinerama
working on my laptop with Radeon 7500, in a laptop, with laptop LCD as
Screen 0 and this NEC as VGA->DVI-A external Screen 1.
The display is fuzzy - as in actively blurry like a CRT scanning at the
wrong frequency or something (it's not just out of focus) - at all but
1024x768 (or something near that).
According to the NEC manual, specs are:
Section "Monitor"
Identifier "NEC"
DisplaySize 410 310 # mm
HorizSync 31.5-91.1
VertRefresh 50-85
VendorName "NEC"
ModelName "LCD2080UX+"
Option "DPMS"
EndSection
Thanks in advance
Zenaan
Reply to: