|
Is there a command to list
the drives attached (not mounted) to the system? Cause I didn't see anything
listed on bootup for my expansion card, and I have both promise things listed
in the kernel and compiled in. It is built onto the mobo
and it is a MBFastTrak133 The drives show up when it boots as it detects them, but I
cant see anything in linux as it boots saying it found them. I also have
a promise Ultra133TX2 and it works fine, this one is built onboard and cant
find any help besides what to do in suse or redhat, im running kernel 2.4.25, I
would think it is supported. Here is my dmesg for the drives it does find….. kernel: PDC20276: IDE controller at PCI
slot 00:06.0 kernel: PDC20276: chipset revision 1 kernel: PDC20276: not 100%% native mode:
will probe irqs later kernel: PDC20276: neither IDE port
enabled (BIOS) kernel: PDC20269: IDE controller at PCI
slot 00:0e.0 kernel: PDC20269: chipset revision 2 kernel: PDC20269: not 100%% native mode:
will probe irqs later kernel: ide2:
BM-DMA at 0x7800-0x7807, BIOS settings: hde:pio, hdf:pio kernel: ide3:
BM-DMA at 0x7808-0x780f, BIOS settings: hdg:pio, hdh:pio kernel: hda: MAXTOR 6L040J2, ATA DISK
drive kernel: hdb: _NEC DVD+RW ND-1100A, ATAPI
CD/DVD-ROM drive kernel: hdc: WDC WD1600JB-32EVA0, ATA
DISK drive kernel: hde: WDC WD2500JB-32FUA0, ATA
DISK drive kernel: hdf: WDC WD2500JB-32FUA0, ATA
DISK drive kernel: blk: queue c033d878, I/O limit
4095Mb (mask 0xffffffff) kernel: blk: queue c033d9c0, I/O limit
4095Mb (mask 0xffffffff) kernel: hdg: WDC WD1200JB-75CRA0, ATA
DISK drive kernel: hdh: WDC WD1200JB-75CRA0, ATA
DISK drive kernel: blk: queue c033dce4, I/O limit
4095Mb (mask 0xffffffff) kernel: blk: queue c033de2c, I/O limit
4095Mb (mask 0xffffffff) hde, hdf, hdg, and hdh are on the promise card that are working, any ideas
on how to get that other built on expansion promise card to work? Thanks for any and all responses Nick |