Re: No PS/2 Mouse with Kernel 2.6.x
Hi,
I've tried this before but it does not work. I've also tried
/dev/psaux and so on, I get nothing on X but the message
"Synaptics driver lost snyc at byte 1" on a console...
The new XF86Config:
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[1]"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
EndSection
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/psaux"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "PS/2"
# Option "Protocol" "ImPS/2"
# Option "Emulate3Buttons" "true"
# Option "ZAxisMapping" "4 5"
#EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
# Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
I think the problem something like
Synaptic PS/2 passthrough??? I#ve realy no idea.
Do anyone have another hint?
Am Sun, 14 Mar 2004 01:40:08 +0100 schrieb Micha Feigin:
> On Sat, Mar 13, 2004 at 05:36:22PM +0000, Sascha Petranka wrote:
>> Hi,
>>
>> I've ASUS L8400B notebook with synaptics touchpad and an external PS/2
>> mouse attached. With Kernel 2.4.x both devices funtioned correctly.
>> Now, with the kernel 2.6.4 and the synaptics driver installed, the
>> touchpad works fine again but the external PS/2 mouse does not. When I
>> move the external mouse on X, nothing happens but when I move the
>> mouse on a console or gpm the message "Synaptics driver lost sync at
>> byte 1" scrolls over the screen. When I touched once the touchpad a
>> message "Synaptics driver resynced" appears once.
>>
>> What can I do, to get my PS/2 mouse working again?
>>
>
> Try using /dev/input/mice as the interface. All mice should be routed
> to that interface emulated as ImPS2
>
>> Thanks for your answers...
>>
>> My dates are:
>>
>> System: Debian Woody, Kernel 2.6.4, XFree86 4.3
>>
>> Dmesg:
>>
>>
>> drivers/usb/core/usb.c: registered new driver hid
>> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>> mice: PS/2 mouse device common for all mice
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> Synaptics Touchpad, model: 1
>> Firmware: 4.6
>> Sensor: 19
>> new absolute packet format
>> Touchpad has extended capability bits
>> -> multifinger detection
>> -> palm detection
>> input: SynPS/2 Synaptics TouchPad on isa0060#/serio1
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> input: AT Translated Set 2 keyboard on isa0060/serio0
>>
>>
>> Kernel config:
>>
>> #
>> # Userland interfaces
>> #
>> CONFIG_INPUT_MOUSEDEV=y
>> CONFIG_INPUT_MOUSEDEV_PSAUX=y
>> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
>> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
>> # CONFIG_INPUT_JOYDEV is not set
>> CONFIG_INPUT_TSDEV=m
>> CONFIG_INPUT_TSDEV_SCREEN_X=240
>> CONFIG_INPUT_TSDEV_SCREEN_Y=320
>> CONFIG_INPUT_EVDEV=m
>> # CONFIG_INPUT_EVBUG is not set
>>
>> #
>> # Input I/O drivers
>> #
>> # CONFIG_GAMEPORT is not set
>> CONFIG_SOUND_GAMEPORT=y
>> CONFIG_SERIO=y
>> CONFIG_SERIO_I8042=y
>> # CONFIG_SERIO_SERPORT is not set
>> # CONFIG_SERIO_CT82C710 is not set
>> # CONFIG_SERIO_PARKBD is not set
>> # CONFIG_SERIO_PCIPS2 is not set
>>
>> #
>> # Input Device Drivers
>> #
>> CONFIG_INPUT_KEYBOARD=y
>> CONFIG_KEYBOARD_ATKBD=y
>> # CONFIG_KEYBOARD_SUNKBD is not set
>> # CONFIG_KEYBOARD_XTKBD is not set
>> # CONFIG_KEYBOARD_NEWTON is not set
>> CONFIG_INPUT_MOUSE=y
>> CONFIG_MOUSE_PS2=y
>> # CONFIG_MOUSE_SERIAL is not set
>> # CONFIG_INPUT_JOYSTICK is not set
>> # CONFIG_INPUT_TOUCHSCREEN is not set
>> # CONFIG_INPUT_MISC is not set
>>
>> Output cat /proc/bus/input/devices:
>>
>> I: Bus=0011 Vendor=0002 Product=0007 Version=0000
>> N: Name="SynPS/2 Synaptics TouchPad"
>> P: Phys=isa0060/serio1/input0
>> H: Handlers=mouse0 event0
>> B: EV=b
>> B: KEY=6420 0 670000 0 0 0 0 0 0 0 0
>> B: ABS=11000003
>>
>> I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>> N: Name="AT Translated Set 2 keyboard"
>> P: Phys=isa0060/serio0/input0
>> H: Handlers=kbd event1
>> B: EV=120003
>> B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
>> B: LED=7
>>
>> XF86Config:
>>
>>
>> Section "InputDevice"
>> Driver "synaptics"
>> Identifier "Mouse[1]"
>> Option "Device" "/dev/psaux"
>> Option "Protocol" "auto-dev"
>> Option "LeftEdge" "1700"
>> Option "RightEdge" "5300"
>> Option "TopEdge" "1700"
>> Option "BottomEdge" "4200"
>> Option "FingerLow" "25"
>> Option "FingerHigh" "30"
>> Option "MaxTapTime" "180"
>> Option "MaxTapMove" "220"
>> Option "VertScrollDelta" "100"
>> Option "MinSpeed" "0.06"
>> Option "MaxSpeed" "0.12"
>> Option "AccelFactor" "0.0010"
>> Option "SHMConfig" "on"
>> # Option "Repeater" "/dev/ps2mouse"
>> EndSection
>>
>> #Section "InputDevice"
>> # Identifier "Configured Mouse"
>> # Driver "mouse"
>> # Option "CorePointer"
>> # Option "Device" "/dev/psaux"
>> # Option "Device" "/dev/input/mice"
>> # Option "Protocol" "PS/2"
>> # Option "Protocol" "ImPS/2"
>> # Option "Emulate3Buttons" "true"
>> # Option "ZAxisMapping" "4 5"
>> #EndSection
>>
>> Section "InputDevice"
>> Identifier "Generic Mouse"
>> Driver "mouse"
>> Option "SendCoreEvents" "true"
>> Option "Device" "/dev/input/mouse0"
>> # Option "Device" "/dev/psaux"
>> Option "Protocol" "ImPS/2"
>> Option "Emulate3Buttons" "true"
>> Option "ZAxisMapping" "4 5"
>> EndSection
>>
>> Section "ServerLayout"
>> Identifier "Default Layout"
>> Screen "Default Screen"
>> InputDevice "Generic Keyboard"
>> # InputDevice "Configured Mouse" "AlwaysCore"
>> InputDevice "Mouse[1]" "CorePointer"
>> # InputDevice "Generic Mouse" "AlwaysCore"
>> InputDevice "Generic Mouse"
>> EndSection
>>
>> XF86.0.log:
>>
>>
>> (II) Keyboard "Generic Keyboard" handled by legacy driver
>> (II) Synaptics touchpad driver version 0.12.5
>> (--) Mouse[1] auto-dev sets Synaptics Device to /dev/input/event0
>> (**) Option "Device" "/dev/input/event0"
>> (**) Option "SHMConfig" "on"
>> (**) Option "LeftEdge" "1700"
>> (**) Option "RightEdge" "5300"
>> (**) Option "TopEdge" "1700"
>> (**) Option "BottomEdge" "4200"
>> (**) Option "FingerLow" "25"
>> (**) Option "FingerHigh" "30"
>> (**) Option "MaxTapTime" "180"
>> (**) Option "MaxTapMove" "220"
>> (**) Option "VertScrollDelta" "100"
>> (**) Option "CorePointer"
>> (**) Mouse[1]: Core Pointer
>> (**) Option "Protocol" "ImPS/2"
>> (**) Generic Mouse: Protocol: "ImPS/2"
>> (**) Option "SendCoreEvents" "true"
>> (**) Generic Mouse: always reports core events
>> (**) Option "Device" "/dev/input/mouse0"
>> (**) Option "Emulate3Buttons" "true"
>> (**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
>> (**) Option "ZAxisMapping" "4 5"
>> (**) Generic Mouse: ZAxisMapping: buttons 4 and 5
>> (**) Generic Mouse: Buttons: 5
>> (II) XINPUT: Adding extended input device "Generic Mouse" (type:
>> MOUSE)
>> (II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
>> Synaptics DeviceInit called
>> SynapticsCtrl called.
>> Synaptics DeviceOn called
>> (II) Generic Mouse: ps2EnableDataReporting: succeeded
>>
>>
>> --
>> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>>
>>
>> +++++++++++++++++++++++++++++++++++++++++++
>> This Mail Was Scanned By Mail-seCure System
>> at the Tel-Aviv University CC.
>>
Reply to: