Maxtor IDE controller cards not working
Hello,
I have a pc that I use as a fileserver and I have recently migrated it from
RH 7.3 to Debian Woody (with some stuff from Sarge and Sid in it). I have 6
disks in the pc as follows:
System/OS /dev/hda 4.2 GB
data /dev/hdo 40 GB
data /dev/hdm 80 GB
data /dev/hde 203 GB
data /dev/hdi 203 GB
data /dev/hdk 203 GB
I want to set up 3 disk RAID 5 array using mdadm and software raid. RH had
no problem with it so I know it can be done. The disks that I used are
recognized on the box as hde, hdi, and hdk. I can use fdisk to recognize
hde, but fdisk will not recognize any other disk on the pc. As you can see
from the dmesg, I am using several Maxtor controller cards (they came with
the hard drives) - 1 hard drive per bus, each set as a master. During
startup the BIOS gives the appropriate messages on the hard drives and the
dmesg seems to suggest that the system at least can identify them. However,
I cannot use 4 of the 6 disks in my pc. If I can mount and format them then
I am sure I can set up the RAID array on the 3 I use for a RAID array
If there is any other information that anyone needs, then I would be happy
to supply it.
Any assistance would be appreciated.
TIA,
Greg
dmesg:
Linux version 2.4.21 (root@galaxy) (gcc version 3.2.3 20030316 (Debian
prerelease)) #1 Sun Aug 3 20:15:59 PDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda1 ro
Initializing CPU#0
Detected 698.660 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1392.64 BogoMIPS
Memory: 515808k/524224k available (1467k kernel code, 8028k reserved, 516k
data, 96k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c3f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb430, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7409: IDE controller at PCI slot 00:07.1
AMD7409: chipset revision 3
AMD7409: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD_IDE: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev 03) UDMA66
controller on pci00:07.1
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
PDC20269: IDE controller at PCI slot 00:08.0
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
PDC20269: ROM enabled at 0xe6000000
ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:pio, hdh:pio
PDC20269: IDE controller at PCI slot 00:09.0
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
PDC20269: ROM enabled at 0xe4000000
ide4: BM-DMA at 0xc800-0xc807, BIOS settings: hdi:pio, hdj:pio
ide5: BM-DMA at 0xc808-0xc80f, BIOS settings: hdk:pio, hdl:pio
PDC20269: IDE controller at PCI slot 00:0c.0
PDC20269: chipset revision 2
PDC20269: not 100% native mode: will probe irqs later
PDC20269: ROM enabled at 0xe8000000
ide6: BM-DMA at 0xe000-0xe007, BIOS settings: hdm:pio, hdn:pio
ide7: BM-DMA at 0xe008-0xe00f, BIOS settings: hdo:pio, hdp:pio
hda: WDC AC14200R, ATA DISK drive
blk: queue c033b620, I/O limit 4095Mb (mask 0xffffffff)
hdd: FX240S, ATAPI CD/DVD-ROM drive
hde: Maxtor 6Y200P0, ATA DISK drive
blk: queue c033bec8, I/O limit 4095Mb (mask 0xffffffff)
hdi: Maxtor 6Y200P0, ATA DISK drive
blk: queue c033c770, I/O limit 4095Mb (mask 0xffffffff)
hdk: Maxtor 6Y200P0, ATA DISK drive
blk: queue c033cbc4, I/O limit 4095Mb (mask 0xffffffff)
hdm: MAXTOR 6L080L4, ATA DISK drive
blk: queue c033d018, I/O limit 4095Mb (mask 0xffffffff)
hdo: MAXTOR 6L040J2, ATA DISK drive
blk: queue c033d46c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0xa400-0xa407,0xa802 on irq 11
ide4 at 0xb800-0xb807,0xbc02 on irq 9
ide5 at 0xc000-0xc007,0xc402 on irq 9
ide6 at 0xd000-0xd007,0xd402 on irq 11
ide7 at 0xd800-0xd807,0xdc02 on irq 11
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: host protected area => 1
hda: 8249472 sectors (4224 MB) w/512KiB Cache, CHS=1023/128/63
hde: attached ide-disk driver.
hde: host protected area => 1
hde: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63,
UDMA(133)
hdi: attached ide-disk driver.
hdi: host protected area => 1
hdi: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63,
UDMA(133)
hdk: attached ide-disk driver.
hdk: host protected area => 1
hdk: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63,
UDMA(133)
hdm: attached ide-disk driver.
hdm: host protected area => 1
hdm: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63,
UDMA(133)
hdo: attached ide-disk driver.
hdo: host protected area => 1
hdo: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=77557/16/63, UDMA(133)
Partition check:
hda: hda1 hda2
hde:
hdi: unknown partition table
hdk: unknown partition table
hdm:hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
blk: queue c033d018, I/O limit 4095Mb (mask 0xffffffff)
PDC202XX: Primary channel reset.
ide6: reset: success
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdm: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdm: dma_intr: error=0x84 { DriveStatusError BadCRC }
PDC202XX: Primary channel reset.
ide6: reset: success
[PTBL] [9732/255/63] hdm1
hdo:hdo: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdo: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdo: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdo: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdo: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdo: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdo: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdo: dma_intr: error=0x84 { DriveStatusError BadCRC }
blk: queue c033d46c, I/O limit 4095Mb (mask 0xffffffff)
PDC202XX: Secondary channel reset.
ide7: reset: success
hdo: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdo: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdo: dma_timer_expiry: dma status == 0x21
hdo: timeout waiting for DMA
PDC202XX: Secondary channel reset.
hdo: timeout waiting for DMA
hdo: (__ide_dma_test_irq) called while not waiting
[PTBL] [4866/255/63] hdo1
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01-ww1
No raid array found
No raid array found
No raid array found
Guestimating sector 8248447 for superblock
Guestimating sector 398267159 for superblock
Guestimating sector 398267159 for superblock
Guestimating sector 398267159 for superblock
Guestimating sector 156353887 for superblock
driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid
array found
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-uhci.c: $Revision: 1.275 $ time 20:17:46 Aug 3 2003
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
host/usb-ohci.c: USB OHCI at membase 0xe081a000, IRQ 10
host/usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-756 [Viper]
USB
host/usb-ohci.c: AMD756 erratum 4 workaround
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cramfs: wrong magic
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 96k freed
Adding Swap: 133048k swap-space (priority -1)
Real Time Clock Driver v1.10e
SCSI subsystem driver Revision: 1.00
ide-floppy driver 0.99.newide
hdd: attached ide-cdrom driver.
hdd: ATAPI 24X CD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected AMD Irongate chipset
agpgart: AGP aperture is 128M @ 0xd8000000
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
eth0: ADMtek Comet rev 17 at 0xcc00, 00:04:5A:43:EA:C1, IRQ 5.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
usbdevfs: remount parameter error
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
Reply to: