Re: enabling dri makes kbd and mouse not work
On Wed, Feb 11, 2004 at 05:43:12PM -0500, Tom Vier wrote:
> i have two cards. one is an agp 9200, but i don't think it's supported.
> right now, i have a pci 7500 installed. i changed some stuff in the config
> and now it almost works. the only problem is, the kbd and mouse buttons
> don't work! the mouse cursor moves just fine, though. weird.
>
I forgot, about the irq thingy, look in /prog/interrupts to see which
interrupts are used for what.
> here's my config:
>
>
>
> Section "ServerLayout"
> Identifier "XFree86 Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> RgbPath "/usr/X11R6/lib/X11/rgb"
> ModulePath "/usr/X11R6/lib/modules"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
> FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
> FontPath "/usr/X11R6/lib/X11/fonts/misc/"
> FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
> FontPath "/usr/X11R6/lib/X11/fonts/CID/"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "extmod"
> Load "xie"
> Load "pex5"
> Load "dri"
> Load "dbe"
> Load "ddc"
> Load "vbe"
> Load "int10"
> Load "record"
> Load "xtrap"
> Load "glx"
> Load "speedo"
> Load "type1"
> Load "freetype"
> EndSection
>
> #Section "DRI"
> # mode 0666
> #EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "keyboard"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "PS/2"
> #Option "ZAxisMapping" "4 5"
> Option "Device" "/dev/psaux"
>
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> UseModes "Modes0"
> HorizSync 30-100
> VertRefresh 50-200
> Gamma 0.95
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "SWcursor" # [<bool>]
> #Option "Dac6Bit" # [<bool>]
> #Option "Dac8Bit" # [<bool>]
> #Option "ForcePCIMode" # [<bool>]
> #Option "CPPIOMode" # [<bool>]
> #Option "CPusecTimeout" # <i>
> #Option "AGPMode" # <i>
> #Option "AGPFastWrite" # [<bool>]
> #Option "AGPSize" # <i>
> #Option "RingSize" # <i>
> #Option "BufferSize" # <i>
> #Option "EnableDepthMoves" # [<bool>]
> #Option "EnablePageFlip" # [<bool>]
> #Option "NoBackBuffer" # [<bool>]
> #Option "PanelOff" # [<bool>]
> #Option "DDCMode" # [<bool>]
> #Option "CloneDisplay" # <i>
> #Option "CloneMode" # [<str>]
> #Option "CloneHSync" # [<str>]
> #Option "CloneVRefresh" # [<str>]
> #Option "UseFBDev" # [<bool>]
> #Option "VideoKey" # <i>
>
> Identifier "Card0"
> Option "UseFBDev"
> Driver "radeon"
> VendorName "ATI Technologies Inc"
> BoardName "Radeon 7500"
> #BusID "PCI:0:16:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> Modes "1280x1024"
> #Modes "1600x1200"
> #Modes "1024x768"
> #Modes "1152x864"
> EndSubSection
> EndSection
>
> #Section "DRI"
> # Mode 0666
> #EndSection
>
> Section "Modes"
> Identifier "Modes0"
> # mode generated by Xeasyconf
> # Modeline "1024x768" 65.003 1024 1048 1184 1344 768 771 777 806 -HSync -VSync
>
>
>
> # 1024x768 @ 100Hz, 80.21 kHz hsync
> #Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
> # 1280x1024 @ 76 Hz, 81.13 kHz hsync
> Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
>
> EndSection
>
> --
> Tom Vier <tmv@comcast.net>
> DSA Key ID 0xE6CB97DA
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
> +++++++++++++++++++++++++++++++++++++++++++
> This Mail Was Scanned By Mail-seCure System
> at the Tel-Aviv University CC.
>
Reply to: