Re: mplayer + esound
On Tue, 2004-01-27 at 16:48, Gustavo Halperin wrote:
> Hanspeter Kunz wrote:
>
> >you could use a more recent version of mplayer.
> >
> >cheers,
> >Hp.
> >
> >MPlayer 1.0pre3-3.3.3 (C) 2000-2003 MPlayer Team
> >
> >
> Thank you very much, now is work.
> Maybe, do you know how to use 'aumix' or 'wmmixer' or any
> applet or application with 'esound'
> Or how to active the '/dev/mixer' with the 'esoun' ??
>
> Thank you again
> Gusti
I'm not sure what your question is. Maybe you can decribe it in more
detail.
To my opinion, accessing /dev/mixer should be independent of esd.
So if you can't access the mixer, then it is probably a problem of the
permissions, but it should not be a problem related to esd.
cheers,
Hp.
>
> >
> >CPU: Intel Pentium M Banias 2374 MHz (Family: 6, Stepping: 5)
> >Detected cache-line size is 64 bytes
> >MMX2 supported but disabled
> >SSE2 supported but disabled
> >CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
> >Compiled for x86 CPU with extensions: MMX SSE
> >
> >Reading config file /etc/mplayer/mplayer.conf
> >Reading config file /home/hkunz/.mplayer/config
> >Available audio output drivers:
> > mpegpes DVB audio output
> > oss OSS/ioctl audio output
> > alsa9 ALSA-0.9.x audio output
> > arts aRts audio output
> > esd EsounD audio output
> > nas NAS audio output
> > sdl SDLlib audio output
> > null Null audio output
> > pcm RAW PCM/WAVE file writer audio output
> > plugin Plugin audio output
> >
> >
> >On Tue, 2004-01-27 at 12:00, Gustavo Halperin wrote:
> >
> >
> >>Hello
> >> I use the esound. XMMS work OK, but the mplayer doesn't now the esd
> >>driver.
> >>When I do mplayer -ao help, I receive:
> >>gusti@r40:~$ mplayer -ao help
> >>MPlayer 1.0pre2-2.95.4 (C) 2000-2003 MPlayer Team
> >>
> >>CPU: Intel Pentium 4/Xeon/Celeron Northwood 1794 MHz (Family: 8,
> >>Stepping: 7)
> >>Detected cache-line size is 64 bytes
> >>CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
> >>Compiled with Runtime CPU Detection - WARNING - this is not optimal!
> >>To get best performance, recompile MPlayer with
> >>--disable-runtime-cpudetection
> >>Reading config file /etc/mplayer/mplayer.conf
> >>Reading config file /home/gusti/.mplayer/config
> >>Available audio output drivers:
> >> mpegpes Mpeg-PES audio output
> >> oss OSS/ioctl audio output
> >> null Null audio output
> >> pcm RAW PCM/WAVE file writer audio output
> >> plugin Plugin audio output
> >>
> >> And the oss doesn't work.
> >>There is any way to use mplayer with 'esd' ???
> >>
> >> Thank you
> >> Very Much
> >> Gusti
> >>--
> >>Regards.
> >>gustavo halperin
> >>_________________________________________
> >>Laboratory for Computer Graphics and CAD
> >>Faculty of Mechanical Engineering
> >>Technion - Israel Institute of Technology
> >>Haifa, Israel 32000
> >>
> >>Tel: 972-4-829-2334
> >>Fax: 972-4-829-5711
> >>e-mail: gustavoh@tx.technion.ac.il <mailto:gustavoh@tx.technion.ac.il>
> >>_________________________________________
> >>
> >>
>
> --
> Regards.
> gustavo halperin
> _________________________________________
> Laboratory for Computer Graphics and CAD
> Faculty of Mechanical Engineering
> Technion - Israel Institute of Technology
> Haifa, Israel 32000
>
> Tel: 972-4-829-2334
> Fax: 972-4-829-5711
> e-mail: gustavoh@tx.technion.ac.il <mailto:gustavoh@tx.technion.ac.il>
> _________________________________________
--
Hanspeter Kunz
Artificial Intelligence Lab
Dept. of Information Technology
University of Zurich
+41 1 635 43 06 work
+41 1 635 68 09 fax
www.ifi.unizh.ch/~hkunz
Reply to: