Help: PCMCIA problems on 2.2 -> 2.4 kernel upgrade

[Julian Gilbey <jdg@polya.uklinux.net>]

Anyone able to help on this one?

I used the Debian bootdisk 2.2.20-idepci kernel to set up on an old
laptop (Toshiba Tecra 740CDT).  I wanted to compile my own kernel,
tried the 2.4.23 kernel.  I used the kernel PCMCIA drivers, but
although the 2.2.20 PCMCIA modules worked perfectly (hence I can send
this email out to the world), the 2.4.23 modules give the following
error:

3c589_cs: RequestIRQ: Resource in use

Now, I've looked at the PCMCIA-HOWTO, but it doesn't make that much
sense to me.  Does anyone have any practical ideas about what I can do
to either debug the modules or, better still, to fix the problem?

Here's a piece of the kernel log file; it might help.  I can provide
other details on request.

Jan 12 23:37:20 polya2 kernel: Linux Kernel Card Services 3.1.22
Jan 12 23:37:20 polya2 kernel:   options:  [pci] [cardbus] [pm]
Jan 12 23:37:20 polya2 kernel: Intel ISA PCIC probe: 
Jan 12 23:37:20 polya2 kernel:   Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
Jan 12 23:37:20 polya2 kernel:     host opts [0]: none
Jan 12 23:37:20 polya2 kernel:     host opts [1]: none
Jan 12 23:37:20 polya2 kernel:     ISA irqs (scanned) = 3,4,5,7,9,10,11 status change on irq 11
Jan 12 23:38:52 polya2 kernel: cs: memory probe 0x0c0000-0x0fffff: excluding 0xe4000-0xfffff
Jan 12 23:38:53 polya2 kernel: 3c589_cs: RequestIRQ: Resource in use

Thanks!

   Julian

-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

        Julian Gilbey, website: http://www.polya.uklinux.net/
   Debian GNU/Linux Developer, see: http://people.debian.org/~jdg/
     Visit http://www.thehungersite.com/ to help feed the hungry