Re: CD Burning problem
On Mon, Jan 12, 2004 at 02:11:30AM +0800, Stephen Liu <satimis@icare.com.hk> wrote:
> # lsmod -l
Without the switch 'lsmod'.
> # modprobe sg
> # modprobe ide-scsi
> all no response
That's OK, Linux is noisy only on errors (well, mostly), so no output
means no problem.
> # cat /etc/lilo.conf
> append="hdc=ide-scsi"
Correct.
> # cdrecord dev=ATAPI -scanbus
> Cdrecord-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J\x{FFFD}rg
> 0,0,0 0) 'SAMSUNG ' 'CD-R/RW SW-240B ' 'R403' Removable CD-ROM
Kewl, you have it.
> Blanking a CDRW
> # cdrecord dev=ATAPI:0,0,0 speed=4 blank=all -v -eject
Wrong IMHO. Either use 2.4.x and ide-scsi -> dev=0,0,0 or use 2.6.x and
_no_ ide-scsi, then dev=ATAPI:/dev/hdc as far as I can remember.
> Burning a CDRW
> # cdrecord dev=ATAPI:0,0,0 speed=4 -v -eject /path/to/folder_containing
> tarball
cdrecord needs an iso image! Either create it first by hand, or use a
GUI which automagically do it for you.
> Fixating time: 76.884s
> cdrecord.mmap: fifo had 235 puts and 235 gets.
> cdrecord.mmap: fifo was 0 times empty and 129 times full, min fill was 96%.
>
> Failed. Can't burn CDRW
NO. It was all right, cdrecord wrote out your data. It was your mistake
that you did not write out an iso9660 filesystem, instead of a tar
file. tar file!=filesystem. :-|
Cheers,
GCS
--
BorsodChem Joint-Stock Company Linux Support Center
Software engineer Developer
+36-48-511211/12-99 +36-20-4441745
Reply to: