Re: CD Writer does not work for audio CD
On Wed, Dec 31, 2003 at 10:00:43PM +0800, Robert Storey wrote:
> I've always had bad luck with CDBakeoven. Things have worked much better
> (for me at least) with K3b and XCDRoast.
>
> That having been said, before you can get any atapi CD drive to work
> with cdrecord, you need to enable scsi emulation. It's a (minor) pain,
> and I've heard that this won't be necessary with the 2.6 kernel, but for
> the 2.4.x kernel it's required.
Not really:
I am using 2.4.22 and burning with atapi, without scsi emulation.
hpd:/home/tony/work# cdrecord dev=ATAPI -scanbus
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003
J?rg Schilling
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'JLMS ' 'XJ-HD166S ' 'DPS6' Removable
CD-ROM
0,1,0 1) 'HP ' 'DVD Writer 300n ' '1.25' Removable
CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
and then
hpd:/home/tony/work# cdrecord dev=ATAPI:0,1,0 -v speed=12 bootbf*iso
Cdrecord-Clone 2.01a19 (i686-pc-linux-gnu) Copyright (C) 1995-2003
J?rg Schilling
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,1,0'
devname: 'ATAPI'
scsibus: 0 target: 1 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.7'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HP '
Identifikation : 'DVD Writer 300n '
Revision : '1.25'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x001B
Profile: 0x001A
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1345536 = 1314 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 38 MB
Total size: 43 MB (04:20.29) = 19522 sectors
Lout start: 44 MB (04:22/22) = 19522 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 340326
Starting to write CD/DVD at speed 8 in real TAO mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation
starts.
Waiting for reader process to fill input buffer ... input buffer
ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
Starting new track at sector: 0
Track 01: 38 of 38 MB written (fifo 100%) [buf 100%] 8.5x.
Track 01: Total bytes read/written: 39976960/39976960 (19520 sectors).
Writing time: 39.613s
Average write speed 7.4x.
Min drive buffer fill was 100%
Fixating...
Fixating time: 30.935s
cdrecord.mmap: fifo had 630 puts and 630 gets.
cdrecord.mmap: fifo was 0 times empty and 557 times full, min fill was
96%.
Despite the warnings, the CD came out perfectly!
Reply to: