Re: PPPoE server settings
On Wed, Dec 24, 2003 at 02:11:32PM +0200, Evgeny Boksha wrote:
> hi2all
> Can somebody post working settings for PPPoE server ?
> (kernel, pppd, pppoe)
>
> I have
> 2.4.21 kernel
> 2.4.2b3 ppp (cvs)
> 3.3-1.1 pppoe
>
> woody 3.0 r1
>
These are the options enabled in my kernel:
CONFIG_PPP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPPOE=y
I then installed the pppoe and pppoeconf and that was about it .There
were a few questions which I answered and the running pon dsl-provider
or /etc/init.d/ppp start just worked.
>
> Briefly - LCP Rejects *really* dont leave pppoe server
> I read in log
> Dec 3 15:20:16 wl1 pppd[459]: sent [LCP ConfRej id=0x0 <callback CBCP>]
>
> But tcpdump on eth0 (server side) dont see this frame...
> And ethereal on client side dont see this frame (
>
> Finally pppoe server only get following frames from client.
> Dec 3 15:20:25 wl1 pppd[459]: rcvd [LCP ConfReq id=0x3 <magic 0x45d5745a>
> <callback CBCP>]
> But client dont get answer from server.
>
> Server also send own LCP requests
> Dec 3 15:20:43 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> But this frames also dont reach client ...
>
> Finally - timeot.
> Dec 3 15:20:46 wl1 pppd[459]: LCP: timeout sending Config-Requests
>
> ==============================
> FULL session :
>
> Dec 3 15:20:16 wl1 pppoe-server[459]: Session 4 created for client
> 00:02:44:56:50:8c (10.67.15.4) on
> eth1
> Dec 3 15:20:16 wl1 pppd[459]: Plugin rp-pppoe.so loaded.
> Dec 3 15:20:16 wl1 pppd[459]: RP-PPPoE plugin version 3.3 compiled
> against pppd 2.4.2b2
> Dec 3 15:20:16 wl1 pppd[459]: pppd 2.4.2b2 started by root, uid 0
> Dec 3 15:20:16 wl1 kernel: eth1: Promiscuous mode enabled.
> Dec 3 15:20:16 wl1 pppd[459]: using channel 8
> Dec 3 15:20:16 wl1 pppd[459]: Using interface ppp0
> Dec 3 15:20:16 wl1 pppd[459]: Connect: ppp0 <--> /dev/pts/3
> Dec 3 15:20:16 wl1 pppd[459]: rcvd [LCP ConfReq id=0x0 <magic
> 0x45d5745a> <callback CBCP>]
> Dec 3 15:20:16 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:16 wl1 pppd[459]: sent [LCP ConfRej id=0x0 <callback CBCP>]
> Dec 3 15:20:18 wl1 pppd[459]: rcvd [LCP ConfReq id=0x1 <magic
> 0x45d5745a> <callback CBCP>]
> Dec 3 15:20:18 wl1 pppd[459]: sent [LCP ConfRej id=0x1 <callback CBCP>]
> Dec 3 15:20:19 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:21 wl1 pppd[459]: rcvd [LCP ConfReq id=0x2 <magic
> 0x45d5745a> <callback CBCP>]
> Dec 3 15:20:21 wl1 pppd[459]: sent [LCP ConfRej id=0x2 <callback CBCP>]
> Dec 3 15:20:22 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:25 wl1 pppd[459]: rcvd [LCP ConfReq id=0x3 <magic
> 0x45d5745a> <callback CBCP>]
> Dec 3 15:20:25 wl1 pppd[459]: sent [LCP ConfRej id=0x3 <callback CBCP>]
> Dec 3 15:20:25 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:28 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:29 wl1 pppd[459]: rcvd [LCP ConfReq id=0x4 <magic
> 0x45d5745a> <callback CBCP>]
> Dec 3 15:20:29 wl1 pppd[459]: sent [LCP ConfRej id=0x4 <callback CBCP>]
> Dec 3 15:20:31 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:33 wl1 pppd[459]: rcvd [LCP ConfReq id=0x5 <magic
> 0x45d5745a> <callback CBCP>]
> Dec 3 15:20:33 wl1 pppd[459]: sent [LCP ConfRej id=0x5 <callback CBCP>]
> Dec 3 15:20:34 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:36 wl1 pppd[459]: rcvd [LCP EchoReq id=0x0 magic=0x0 06 00
> 00 00]
> Dec 3 15:20:37 wl1 pppd[459]: rcvd [LCP ConfReq id=0x6 <magic
> 0x45d5745a> <callback CBCP>]
> Dec 3 15:20:37 wl1 pppd[459]: sent [LCP ConfRej id=0x6 <callback CBCP>]
> Dec 3 15:20:37 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:40 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:41 wl1 pppd[459]: rcvd [LCP ConfReq id=0x7 <magic
> 0x45d5745a> <callback CBCP>]
> Dec 3 15:20:41 wl1 pppd[459]: sent [LCP ConfRej id=0x7 <callback CBCP>]
> Dec 3 15:20:43 wl1 pppd[459]: sent [LCP ConfReq id=0x1 <auth pap>
> <magic 0x1050c58a>]
> Dec 3 15:20:45 wl1 pppd[459]: rcvd [LCP ConfReq id=0x8 <magic
> 0x45d5745a> <callback CBCP>]
> Dec 3 15:20:45 wl1 pppd[459]: sent [LCP ConfRej id=0x8 <callback CBCP>]
> Dec 3 15:20:46 wl1 pppd[459]: rcvd [LCP EchoReq id=0x0 magic=0x0 06 00
> 00 00]
> Dec 3 15:20:46 wl1 pppd[459]: LCP: timeout sending Config-Requests
> Dec 3 15:20:46 wl1 pppd[459]: Connection terminated.
> Dec 3 15:20:46 wl1 pppd[459]: Waiting for 1 child processes...
> Dec 3 15:20:46 wl1 pppd[459]: script /usr/sbin/pppoe -n -I eth1 -e
> 4:00:02:44:56:50:8c, pid 460
> Dec 3 15:20:53 wl1 pppd[459]: Terminating on signal 15.
> Dec 3 15:20:53 wl1 pppd[459]: Waiting for 1 child processes...
> Dec 3 15:20:53 wl1 pppd[459]: script /usr/sbin/pppoe -n -I eth1 -e
> 4:00:02:44:56:50:8c, pid 460
> Dec 3 15:20:53 wl1 pppoe[460]: Received signal 15.
> Dec 3 15:20:53 wl1 pppd[459]: Script /usr/sbin/pppoe -n -I eth1 -e
> 4:00:02:44:56:50:8c finished (pid
> 460), status = 0x0
> Dec 3 15:20:53 wl1 pppd[459]: Exit.
> Dec 3 15:20:53 wl1 pppoe-server[447]: Session 4 closed for client
> 00:02:44:56:5 0:8c
> (10.67.15.4) on eth1
> Dec 3 15:20:53 wl1 pppoe-server[447]: Sent PADT
>
>
>
>
> thx2all
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
Reply to: