Problems getting dialup to work
I'll be moving soon, and temporarily slumming it on dialup, bleagh. I
set up an account on a low-cost dial-up ISP (they confirm connection is
bog-standard, and no special software is required). I also installed
wvdial and set up the account. Wvdial requires root to run !!! Testing
it from root, it sees the login/password prompts and responds. The
connection seems to be established, but nothing happens, and my external
modem's lights stay solid. The same machine+modem did work with Redhat
7.3.
Here is the output of route -n with adsl running...
[18:34:34][/root] route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.248 0.0.0.0 255.255.255.248 U 0 0 0 eth0
0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth0
Here it is with the dialup connection established...
[18:34:31][/root] route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
64.7.158.21 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.1.248 0.0.0.0 255.255.255.248 U 0 0 0 eth0
0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth0
Here is the wvdial dialog with userid and phone# X'd out. Any ideas
anyone ?
[18:33:08][/root] wvdial
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDTxxxxxxxxxx
--> Waiting for carrier.
ATDTxxxxxxxxxx
CONNECT 50666/ARQ/V90/LAPM/V42BIS
--> Carrier detected. Waiting for prompt.
login:
login:
--> Looks like a login prompt.
--> Sending: XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Password:
--> Looks like a password prompt.
--> Sending: (password)
PPP session from (64.7.158.21) to 38.112.103.21 beginning....~[7f]}#@!}!}!} }4}"}&} } } } }%}&u}!Vs}'}"}(}"}3K~
--> PPP negotiation detected.
--> Starting pppd at Tue Dec 9 18:33:41 2003
--> pid of pppd: 673
It stalls and just sits here until I hit CTRL-C
--> Disconnecting at Tue Dec 9 18:35:04 2003
[18:35:04][/root]
--
Walter Dnes <waltdnes@waltdnes.org>
Email users are divided into two classes;
1) Those who have effective spam-blocking
2) Those who wish they did
Reply to: