Re: Motherboard ASUS a7v600: is anybody using this?
On Sun, 09 Nov 2003 12:49:07 -0600
Hanasaki JiJi <hanasaki@hanaden.com> wrote:
> Could I ask about the complete specs and costs of what you put
> together?
> I have been eye'ing the Asus A7V600 also. These are the parts I was
>
> looking at.. Off www.newegg.com
>
> $130 SAPPHIRE ATI RADEON 9600 256MB 8X AGP
> But sarge has xfree 4.2 and 4.3 is needed for readeon
> $210 AMD ATHLON XP 3000 "Barton" 400MHz FSB OEM
> What is needed for an OEM
> Suggestions on a Fan? What is "grease"?
> It would be a waste to get the kt600 and not get
> a cpu that can do fsb400
> ???? How large of a power supply?
> ???? 2 x 200GB WD harddrives
> $220 2 x KINGSTON KVR400X64C25/512 512MB 400MHz
> The board max's at 1 gig :(
>
> Is the ethernet only Gigabit? My network is all 10/100.
>
> The plan was to boot and install the minimum from woody then upgrade
> to sarge and get kernel 2.4.22 (newest as of 11/9/2003)
>
> Any thoughts, input, advise, suggestions?
>
> Thanks so much!
>
PSUs, cooling units, and all other rated, recommended accessories for
AMD CPUs can be found on the AMD site.
Regards,
David.
Reply to: