Re: scsi emulation: atapi reset irq timeout and other nasties...
Hi folk.
> scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 In
> quiry 00 00 00 ff 00 hdc: irq timeout: status=0xd0 { Busy }
> hdc: DMA disabled
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xd0 { Busy }
> scsi0 channel 0 : resetting for second half of retries.
> SCSI bus is being reset for host 0 channel 0.
> hdc: status timeout: status=0xd0 { Busy }
> hdc: drive not ready for command
> hdc: ATAPI reset complete
> scsi : aborting command due to timeout : pid 1, scsi0, channel 0, id 0, lun 0 In
> quiry 00 00 00 ff 00 SCSI host 0 abort (pid 1) timed out - resetting
> SCSI bus is being reset for host 0 channel 0.
> SCSI host 0 channel 0 reset (pid 1) timed out - trying harder
> SCSI bus is being reset for host 0 channel 0.
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: ATAPI reset complete
> hdc: irq timeout: status=0xd0 { Busy }
> hdc: status timeout: status=0xd0 { Busy }
>
> and so on...
I have some problem when I try compile 2.4.22 version of kernel by gcc version 3.3.2 20031005 (Debian prerelease) compiler.
If I compile this version of kernel my old version gcc compiler (2.95.4-0.010424) scsi emulation
work well.
Why this happen? And how can I do support scsi in this case?
Thnx.
Reply to: