xf86 3.0, i845, no go

To: debian-user@lists.debian.org
Subject: xf86 3.0, i845, no go
From: Joe Paxton <joepa@1st.net>
Date: Sat, 6 Sep 2003 15:51:27 -0400
Message-id: <[🔎] 20030906195127.GA430@localhost>

I am using the vesa driver of XFree86 3.0 from experimental with i845
chipset; when doing 'startx', one of two things occurs: either the
server aborts, giving a "no screens found" error, or else multiple lines
and dots of various colors appear on the screen and the machine locks.

I have used debconf to try several different combinations of color
depths and resolutions. None have thus far been successful, but, as I
said, the results that they yield are consistent. The multiple lines of
various colors (and machine locking) happens at color depths <=8bpp, and
the "no screens found" error occurs at colors depths >8bpp -- resolution
doesn't seem to matter in either case.

No other fatal error messages (besides the "no screens found") occur. I
have attached the error logs for each situation, and I have also
attached the XFree86Config-4 for each situation (all named so as to
hopefully avoid ambiguity). I am using kernel-image-2.4.21-4-686 on a
2.4GHz P4 with 256MB of RAM. I have the kernel AGP module loaded, and
there doesn't appear to be a DRM module for the i845 chipset with the
kernerl that I am using. I would greatly appreciate any help that could
be provided.  

--
Joe Paxton

### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"extmod"
	Load	"freetype"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"Generic Mouse"
	Driver		"mouse"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"Intel Corporation 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device"
	Driver		"vesa"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	30-70
	VertRefresh	50-150
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Intel Corporation 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device"
	Monitor		"Generic Monitor"
	DefaultDepth	8
	SubSection "Display"
		Depth		1
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice	"Generic Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

### END DEBCONF SECTION

X: warning; process set to priority -11 instead of requested priority -10

XFree86 Version 4.3.0 (Debian 4.3.0-0pre1v1 20030731221840 root@)
Release Date: 18 March 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.0-test1-bk2 i686 [ELF] 
Build Date: 31 July 2003
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.21-4-686 (herbert@gondolin) (gcc version 3.3.1 20030626 (Debian prerelease)) #1 Sat Aug 2 23:27:25 EST 2003 
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Sep  6 15:44:01 2003
(==) Using config file: "/etc/X11/XF86Config-4"

### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"extmod"
	Load	"freetype"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"Generic Mouse"
	Driver		"mouse"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"Intel Corporation 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device"
	Driver		"vesa"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	30-70
	VertRefresh	50-150
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Intel Corporation 82845G/GL [Brookdale-G] Chipset Integrated Graphics Device"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice	"Generic Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

### END DEBCONF SECTION


XFree86 Version 4.3.0 (Debian 4.3.0-0pre1v1 20030731221840 root@)
Release Date: 18 March 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.0-test1-bk2 i686 [ELF] 
Build Date: 31 July 2003
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.21-4-686 (herbert@gondolin) (gcc version 3.3.1 20030626 (Debian prerelease)) #1 Sat Aug 2 23:27:25 EST 2003 
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Sep  6 15:28:49 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(EE) VESA(0): No matching modes
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to debian-x@lists.debian.org.

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.

Reply to:

Follow-Ups:
- Re: xf86 3.0, i845, no go
  - From: Johan Kullstam <kullstj-ml@comcast.net>

Prev by Date: Re: Similar app for Disk Catalog?
Next by Date: IRQ pileup
Previous by thread: File blocked - ScanMail for Lotus Notes --> Thank you! (One or more files where removed from this message)
Next by thread: Re: xf86 3.0, i845, no go
Index(es):
- Date
- Thread