Re: cd burning
Wednesday 30 of July 2003 08:41 je &F pisal:
>Hello All,
>
>It has been a struggle, but "Woody" is installed using the bf24 option. I
> have Xinerama working, the scanner scans, the computer can communicate with
> the digital camera.
>
>But I'm hitting a wall with the cd burning.
>
>I get to the part in the Howto where you test for the modules:
>
>ide-cd
>ide-scsi
>loop
>scsi_mod
>sr_mod
>iso9660
>
>and my good computer says they are nowhere to be found.
>
>So where do I get them?
>
>Thanks,
>Conrad
>
>
>---------------------------------
>Do you Yahoo!?
>Yahoo! SiteBuilder - Free, easy-to-use web site design software
You must run modconf in your console and load the modules you need.
From the menu that will popup you must choose the modules ide-scsi, sg,
sr_mod (you will find them under kernel/drivers/scsi).
After that edit your /etc/lilo.conf and add the line append="hdx=ide-scsi
max_scsi_luns=1 hdy=ide-cd" after the line root=/dev/hda3. Save and run lilo.
hdx is your cdburner and hdy is your cdrom or DVD if you have it of course.
Reboot. Now your cdburner will become a "scsi" device so his name will change.
Open a console and run: dmesg | grep scsi and look for the line that will say
Attached scsi CD-ROM sr0 at scsi0 . . .
Edit /etc/fstab and look for the line that points to your cdburner (/dev/hdx)
and change to the value sr0. You'd probably want to change the mount point as
well. Point your cdburner to /mount/cdrw or /cdrw. Save and exit.
Go to / and make a directory called cdrw. Reboot and that should do it.
You might want to check this fine howto:
http://newbiedoc.sourceforge.net/peripherals/cdrw.html, because I have
probably left out some steps.
If you cannot find the modules you need, you'll have to build'em up. ;-))
HTH,
Jernej Zidar
Reply to:
- References:
- cd burning
- From: Conrad Schuler <conradschuler@yahoo.com>