Re: Looking for tips on ppp problem: LCP ConfReq
Hi!
On Wed Jun 25, 2003 at 11:46:00PM +0200, Hugo van der Merwe wrote:
> gateway/firewall/webserver. I had to move it to a modem for a while,
> however, it refuses to connect. The laptop, however, with pretty much
> an identical setup, connects without a hitch. So at the moment I've
> got the laptop set up as gateway so that I can send this.
What are the modem manufacturers? Do you connect with a US Robotics on
the gateway and with the internal modem of the laptop?
> The connection doesn't get any further than LCP ConfReq. Apart for
[...]
> Jun 25 22:04:59 baboon chat[31603]: ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0^M^M
[...]
> Jun 25 22:05:34 baboon pppd[31601]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x6b4f31ac> <pcomp> <accomp>]
I had a similar problem yesterday. I have a US Robotics Sportster
Message Plus. All went well except those pesky hangups without any
special reason.
So I found a french (sic!) page and I only could read some thoughts on
USR AT commands. So I added AT&F1 before the ATDT stuff and voilà it
worked without a hassle.
I don't know if you use a USR modem but I think your problem lies within
some special AT commands to setup your modem properly. Maybe there are
some helping codes in the Modem-HOWTO.
So long
Thomas
--
.''`. Obviously we do not want to leave zombies around. - W. R. Stevens
: :' : Thomas Krennwallner <djmaecki at ull dot at>
`. `'` 1024D/67A1DA7B 9484 D99D 2E1E 4E02 5446 DAD9 FF58 4E59 67A1 DA7B
`- http://bigfish.ull.at/~djmaecki/
Reply to: