Re: fried(?) computer hangs on boot
On approximately Mon, May 26, 2003 at 05:28:51PM -0400, Mark L. Kahnt wrote:
<snip>
>
> I run lm-sensors on hosehead here, and while the heatsink is smaller
> than I've found on most other systems, this box has been keeping the 800
> MHz P3 at 112C. I don't feel that is bad, as the screenshot I got of the
> gkrellm sensor monitor indicated that the machine it was snapped from
> ran with a CPU at over 200C. BTW, those are Celsius temperatures, not
> hex values ;)
>
I think you mean to say Fahrenheit temps. Even at Farhrenheit the temps
you mention are outrageous. Just for comparison my Athlon XP2000 runs
at 43C, or about 110F.
--
Josh McKinney | Webmaster: http://joshandangie.org
--------------------------------------------------------------------------
Linux, the choice | They that can give up essential liberty
of a GNU generation -o) | to obtain a little temporary safety deserve
Kernel 2.4.20-ck6 /\ | neither liberty or safety.
on a Athlon-XP _\_v | -Benjamin Franklin
Reply to: