Pctel modem problem
Hi,
i am sorry, may be this is for a different list, but I've always
received the best help from you guys, so I dare to ask here. I am trying
to convince a modem on older Mitac notebook to let on internet. So far
it only freezes minicom, in kppp I can "query modem", it says "modem
ready", but I get no information from those ATI, only blank spaces in
all lines. When try to connect to my ISP it says "the modem is not
responding". I use pctel-0.9.4 driver which compiles flawlessly. My
modem's PCTel PCT789T chipset.
This all the information I've been working with:
part of my dmesg output:
PCTel device[00:0a.0](0x50) found "PCTel Inc HSP MicroModem 56 (rev
01)", iobase=0x3100, irq=9.
PCTel driver version 0.9.5 [5.05c-4.27.215 (09-14-2001)] (PCT789)
(2002-01-31) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled.
PCTel driver built on [Linux 2.4.20.03 i686 unknown "2.4.20.03
<132116>"] with gcc-gcc (GCC) 3.2.3 20030415 (Debian prerelease).
ttyS15 at 0x3100 (irq = 9) is a PCTel
cs: cb_free(bus 2)
PCTel initialization. Country code is 0.
PCTel initialization. Country code is 0.
PCTel initialization. Country code is 0.
cs: cb_alloc(bus 2): vendor 0x1186, device 0x1340
PCI: Enabling device 02:00.0 (0000 -> 0003)
PCI: Setting latency timer of device 02:00.0 to 64
setserial -g /dev/ttyS*:
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 2
/dev/ttyS1, UART: 16550A, Port: 0x02f8, IRQ: 3
/dev/ttyS15, UART: undefined, Port: 0x3100, IRQ: 2
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3
lspci -v:
00:0a.0 Communication controller: PCTel Inc HSP MicroModem 56 (rev 01)
Subsystem: PCTel Inc: Unknown device 0001
Flags: stepping, medium devsel, IRQ 9
I/O ports at 3100 [size=64]
Capabilities: <available only to root>
cat /proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
1000-103f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
1040-105f : Intel Corp. 82371AB/EB/MB PIIX4 USB
1040-105f : usb-uhci
1100-110f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
1100-1107 : ide0
1108-110f : ide1
1400-141f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
3100-313f : PCTel Inc HSP MicroModem 56
4000-40ff : PCI CardBus #02
4000-40ff : PCI device 1186:1340
4000-40ff : 8139too
4400-44ff : PCI CardBus #02
cat /proc/pci:
Communication controller: PCTel Inc HSP MicroModem 56 (rev 1).
IRQ 9.
I/O at 0x3100 [0x313f].
Bus 1, device 0, function 0:
I am really at the end of my wits. I've been using Linux for 6 months
only (Debian 2 months) and there is still much for me to learn. Can
anyone help me with this? Some pointer would be just fine.
Thanks a lot, it would save me from buying pcmcia modem.
Petr
Reply to: