[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: drive errors!



On Thu, 13 Mar 2003 05:48:01 -0500
Tom Allison <tallison@tacocat.net> wrote:

> ronin2@bellatlantic.net wrote:
> > On Wed, 12 Mar 2003 17:29:05 -0500
> > Tom Allison <tallison@tacocat.net> wrote:
> > 
> > 
> >>I've been runnign this PC for about a year now.
> >>I recently upgraded from 2.4.18 to 2.4.20.
> >>And this is the thanks I get....
> >>Any suggestions?  It seems to work.
> >>--------------------------------------------------------------------
> >>Mar 12 12:14:21 gandolf kernel: hda: dma_intr: error=0x84 {
> >>DriveStatusError BadCRC }Mar 12 12:14:21 gandolf kernel: hda:
> >dma_intr: >status=0x51 { DriveReady
> >>SeekCompleteError }
> > 
> > 
> > Do make menuconfig, and go to ATA/IDE/MFM/RLL support | IDE, ATA,
> > and ATAPI Block devices, and set "Use multi-mode by default". See
> > the help text for that option.
> > 
> > Kevin
> > 
> > 
> 
> Some additional information about the problem.
> 
> The kernel is a stock Debian kernel.  So was the 2.4.18 kernel.
> 
> Under 2.4.18, I do not get these errors.
> 
> If I revert back to the 2.4.18 kernel, the errors go away.
> 
> Therefore I am not certain that this drive is on the virge of death, 
> rather I think that the kernel is just buggered.
 
I had problems like that with a sis chipset and ran the cerberus hd test
on the drive for one week flat on the drive trying to destroy it (if it
doesn't work at all you don't get BS form the warranty guys) but didn't
succeed.
This was about 6 month ago.About 3 month ago happened the same thing
again. It affects only the ext3 partitions.I tried now with reiser for
/ and it works fine so far.

Klaus



Reply to: