VM: killing process polyclt
Hello again.
I am facing the following problem:
paegasus:/usr/local/polydev/bin # ifconfig
0: error fetching interface information: Device not found
paegasus:/usr/local/polydev/bin #
As far as I can understand, the system looses the network card.
After 5 mins, the system finds the network card again.
* * * dmesg part * * *
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw@saw.sw.com.sg> and others
Neverthelss, the statitistics about the card are the correct ones:
paegasus:/usr/local/polydev/bin # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:A0:C9:8C:DB:79
inet addr:10.100.0.10 Bcast:10.100.255.255 Mask:255.255.0.0
inet6 addr: fe80::2a0:c9ff:fe8c:db79/10 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10347997 errors:0 dropped:0 overruns:0 frame:12
TX packets:9473547 errors:0 dropped:0 overruns:0 carrier:2
collisions:6644482 txqueuelen:100
RX bytes:4088169868 (3898.7 Mb) TX bytes:3843537279 (3665.4 Mb)
Interrupt:5 Base address:0x1000
* * * /var/log/messages * * *
Mar 4 20:50:22 paegasus kernel: __alloc_pages: 0-order allocation
failed (gfp=0x1f0/0)
Mar 4 20:50:23 paegasus last message repeated 2 times
Mar 4 20:50:23 paegasus /usr/sbin/cron[793]: (CRON) STAT FAILED (tabs)
Mar 4 20:50:23 paegasus kernel: __alloc_pages: 0-order allocation failed
(gfp=0x1f0/0)
Mar 4 20:50:34 paegasus last message repeated 3 times
Mar 4 20:50:34 paegasus kernel: __alloc_pages: 0-order allocation failed
(gfp=0x1d2/0)
Mar 4 20:50:47 paegasus kernel: __alloc_pages: 0-order allocation failed
(gfp=0x1d2/0)
Mar 4 20:50:47 paegasus kernel: VM: killing process polyclt
Mar 4 21:00:15 paegasus modprobe: modprobe: Can't locate module 0
Polyclt program runs from user root.
What can I do to resolve this problem?
Do I have to change any system variable?
Many thanks in advance,
Mihalis.
-----
:wq
Reply to: