Re: Nvidia and X
I saw your device section, try it w/o BusID.
> Section "Device"
> Identifier "Generic Video Card"
> Driver "nvidia"
> BusID "PCI:1:0:0" <<<<<remove this line
I don't have this line and it works fine. I don't recognize your monitor, but I use the same video card, if your screen goes black, turn it of and on, I had that ptoblem to. If you monitor is an LCD device, try to adjust the position. At my place I got the screen running, I don't know how to get picture w/o reset the monitor or adjust the position
Kind regards,
Willem-Jan Meijer
> van: Steve Webster <moonunit@ukonline.co.uk>
> datum: 2003/02/19 wo AM 08:33:33 CET
> aan: Debian-User <debian-user@lists.debian.org>
> onderwerp: Nvidia and X
>
> Hello
>
> I compiled a new kernel, 2.4.18, for ACPI and nvidia drivers. All went
> well, eventually. After updating my XF86Config-4 I tried re-starting
> x-windows. All I got was a black screen, no flashes of color, nothing. I
> couldn't see any consoles either and had to do a re-boot.
>
> My XF86Conig is below. The only difference between that and the one I'm
> running now is the driver name and the commented-out modules.
>
> The XFree86.log doesn't look that much different from when I was using
> the nv driver. I'll send it if anyone wants to see it.
>
> Thing is I've had nvidia working before, pre ACPI and pre this
> installation of debian 3. (I've installed it a couple of times now, just
> to get used to it.) So I'm wondering if it has somethng to do with ACPI.
>
> Has anyone had a similar experience, or got a clue.... Help gratefully
> recieved.
>
> Steve
>
> p.s. I have a Dell E770p monitor and a Nvidia TNT2 M64 board.
>
> ###############################################################################################
> #XF86Config-4
> .
> .
> .
>
> Section "Files"
> # local font server
> FontPath "unix/:7100"
> # defoma font server
> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
> # we can fall back on these if the local/defoma servers have
> problems
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "speedo"
> Load "type1"
> # Load "GLcore"
> # Load "bitmap"
> # Load "dbe"
> # Load "ddc"
> # Load "dri"
> # Load "int10"
> # Load "pex5"
> # Load "record"d"
> # Load "vbe"
> # Load "xie"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "gb"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Device"
> Identifier "Generic Video Card"
> Driver "nvidia"
> BusID "PCI:1:0:0"
> EndSection
>
> Section "Monitor"
> Identifier "Generic Monitor"
> HorizSync 31-60
> VertRefresh 50-75
> Option "DPMS"
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Generic Video Card"
> Monitor "Generic Monitor"
> DefaultDepth 24
> SubSection "Display"
> Depth 1
> Modes "1024x768" "800x600"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1024x768" "800x600"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1024x768" "800x600"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1024x768" "800x600"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1024x768" "800x600"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1024x768" "800x600"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
Reply to: