Re: please help on adsl sharing
On Wed, Feb 05, 2003 at 03:56:57PM +0100, Attila Csosz wrote:
> I try to set up adsl sharing on two computer but I have problems.
> The situation:
>
> adsl --->A(connected to adsl) ------ B(internal machine)
>
> I do the followings:
>
> on machine A have the followings:
> ------------------------------------
> 1) /etc/network/interfaces
> auto lo
> iface lo inet loopback
> auto eth0 eth1
> iface eth0 inet static
> address 192.168.1.2
> netmask 255.255.255.0
> network 192.168.1.0
> broadcast 192.168.1.255
> iface eth1 inet static
> address 192.168.1.1
> netmask 255.255.255.0
> network 192.168.1.0
> broadcast 192.168.1.255
This does not make sense. I you are using one card port to do 2
address, read about IP ALIASING. eth0:1 etc.
I do ont undersytand why you put both in same netweork segment?
Usually we use separate ones.
See my example at:
http://www.debian.org/doc/manuals/reference/ch-gateway.en.html
--
~\^o^/~~~ ~\^.^/~~~ ~\^*^/~~~ ~\^_^/~~~ ~\^+^/~~~ ~\^:^/~~~ ~\^v^/~~~ +++++
Osamu Aoki <osamu@debian.org> Cupertino CA USA, GPG-key: A8061F32
.''`. Debian Reference: post-installation user's guide for non-developers
: :' : http://qref.sf.net and http://people.debian.org/~osamu
`. `' "Our Priorities are Our Users and Free Software" --- Social Contract
Reply to: