[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

HP 8250i cd-writer



Hi,

Did somebody already get an HP 8250i cd-writer working on Woody? I've
never had any problems with an HP 8100i or so, but the 8250i seems to
be problematic, although it would be supported.

As usual, I've setup SCSI emulation and cdrecord -scanbus detects both
the cdrom and the cd-writer. However, when trying to write a cdrom, it
seems that cdrecord cannot start a new session:

--- begin ---
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.22
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 0 = CD-DA
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'IDE-CD  '
Identifikation : 'R/RW 8x4x32     '
Revision       : ' 2.0'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1572864 = 1536 KB
FIFO size      : 4194304 = 4096 KB
Track 01: audio   0 MB (00:00.42) no preemp pad padsize: 615 KB (00:03.57)
Track 02: audio  24 MB (02:25.84) no preemp
Track 03: audio  26 MB (02:39.16) no preemp
Track 04: audio  25 MB (02:28.77) no preemp
Track 05: audio  22 MB (02:12.40) no preemp
Track 06: audio  23 MB (02:21.36) no preemp
Track 07: audio  22 MB (02:15.57) no preemp
Track 08: audio  24 MB (02:22.76) no preemp
Track 09: audio  21 MB (02:07.66) no preemp
Track 10: audio  27 MB (02:41.57) no preemp
Track 11: audio  29 MB (02:54.96) no preemp
Track 12: audio  23 MB (02:18.37) no preemp
Track 13: audio  21 MB (02:08.36) no preemp
Track 14: audio  27 MB (02:45.37) no preemp
Track 15: audio  25 MB (02:28.89) no preemp
Track 16: audio  23 MB (02:21.84) no preemp
Track 17: audio  19 MB (01:55.02) no preemp
Track 18: audio  26 MB (02:36.77) no preemp
Track 19: audio  25 MB (02:34.22) no preemp
Track 20: audio  30 MB (03:02.93) no preemp
Track 21: audio  30 MB (03:02.70) no preemp
Total size:     502 MB (49:48.57) = 224143 sectors
Lout start:     503 MB (49:50/43) = 224143 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11849 (97:24/01)
  ATIP start of lead out: 336075 (74:43/00)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 25
Manufacturer: Taiyo Yuden Company Limited
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 111932
RBlocks total: 346856 RBlocks current: 346856 RBlocks remaining: 122713
Starting to write CD/DVD at speed 4 in dummy mode for single session.
Last chance to quit, starting dummy write in 9 seconds.8 seconds.7 seconds.6 seconds.5 seconds.4 seconds.3 seconds.2 seconds.1 seconds.0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... cdrecord: Input/output error. mode select g1: scsi sendcmd: no error
CDB:  55 10 00 00 00 00 00 00 3C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 13 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 200s
cdrecord: Warning: using default CD write parameter data.
Mode Select Data 00 11 00 00 05 32 12 00 00 00 00 00 00 00 00 00 00 00 00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cdrecord: Cannot open new session.
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
input buffer ready.
---  end  ---

Also tried with cdrdao, which gives a similar error message:

--- begin ---
Cdrdao version 1.1.5 - (C) Andreas Mueller <andreas@daneb.de>
 SCSI interface library - (C) Joerg Schilling
 L-EC encoding library - (C) Heiko Eissfeldt
 Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver
tables.

Using libscg version 'schily-0.5'

0,1,0: IDE-CD R/RW 8x4x32    Rev:  2.0
Using driver: Generic SCSI-3/MMC - Version 1.2 (options 0x0000)

Starting write at speed 4...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
?: Input/output error.  : scsi sendcmd: no error
CDB:  55 10 00 00 00 00 00 00 3C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 13 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 180s
ERROR: Cannot set write parameters mode page.
ERROR: Writing failed.
---  end  ---


-- 
lenaerts.frank@pandora.be

Those who do not understand Unix are condemned to reinvent it, poorly."
-- Henry Spencer

Attachment: pgpJSzmGialmU.pgp
Description: PGP signature


Reply to: