ADSL using pppoe & pppoeconfig

["Ricardo Diz" <op6001@mail.telepac.pt>]

Hi there,

I'm now a proud owner of a ADSL net connection. There is only one
problem. I can't make it to work under linux.

I've installed the lastest pppoe and pppoeconfig (I'm running unstable)
and it all promised to be quite simple. I used pppoeconfig for setting
things up and it seemed to work fine until it started the connection.
Here is the log:

Oct  4 17:29:02 (none) pppd[1074]: Connect: ppp0 <--> /dev/pts/0
Oct  4 17:29:02 (none) pppd[1074]: not replacing existing default route
to eth0 [193.136.238.1]
Oct  4 17:29:02 (none) pppd[1074]: Cannot determine ethernet address for
proxy ARP
Oct  4 17:29:02 (none) pppd[1074]: local  IP address 213.13.230.110
Oct  4 17:29:02 (none) pppd[1074]: remote IP address 213.13.200.1
Oct  4 17:29:02 (none) pppd[1074]: primary   DNS address 194.65.5.2
Oct  4 17:29:02 (none) pppd[1074]: secondary DNS address 194.65.3.21

So it appears to be connected since I'm assigned a IP, but I can't ping
nothing but the remote address (or my own, of course). 

There are in fact 3 things that amazed me: In the first line I was
expecting eth0 instead of pts/0; I don't know why the second line
appear; the third line looks really bad.

"ipconfig" shows that the packets I sent don't go from eth0 to ppp0...

"route -n" seems normal

Any advices?

Regards,
Ricardo Diz