[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Woody routing question...



> 0.0.0.0        xxx.yy.234.129 0.0.0.0         UG    0      0     0 eth1
> 0.0.0.0        aaa.bbb.80.130 0.0.0.0         UG    1      0     0 eth0


Just a little question. I thought Linux can only have 1 gateway? Just
curios..
Abt ur problem Sean, i dont think i can help much.

Goodluck!



=====
Thanks,
Louie Miranda...

WebUrl: http://axis0.endofinternet.org
Email: louie@linux.nu - louie@noc.chikka.com

----- Original Message -----
From: "Sean Cardus" <sean_cardus@hotmail.com>
To: <debian-user@lists.debian.org>
Sent: Friday, August 09, 2002 4:40 PM
Subject: Woody routing question...


> Hi All,
>
> I've just setup a Debian Woody alpha machine and am currently having
> problems with routing...  I'm not entirely sure this problem is
appropriate
> for this list, but here goes... Appologies for the length of the mail too
:)
>
> I've got 2 network cards in my machine - Each card is connected to
different
> networks, but both have public IP addresses.
>
> eth0 = IP: aaa.bbb.80.144 Network: aaa.bbb.80.128 Mask: 255.255.255.128
> eth1 = IP: xxx.yy.234.131 Network: xxx.yy.234.128 Mask: 255.255.255.192
>
> My current routing table, as show by running "route -n" is as follows:
> Destination    Gateway        Genmask         Flags Metric Ref Use Iface
> xxx.yy.234.128 0.0.0.0        255.255.255.192 U     0      0     0 eth1
> aaa.bbb.80.128 0.0.0.0        255.255.255.128 U     0      0     0 eth0
> 0.0.0.0        xxx.yy.234.129 0.0.0.0         UG    0      0     0 eth1
> 0.0.0.0        aaa.bbb.80.130 0.0.0.0         UG    1      0     0 eth0
>
> eth0 is located on a subnet within a larger network - As follows:
> Network: aaa.bbb.80.0 Netmask: 255.255.248.0
>
> eth1 is my main Internet connection, it is used for almost all Internet
> bound traffic.
>
> eth0 is a network connected to the Internet via a lower bandwidth
> connection.  The main reason for this interface is to allow hosts on its
> network to connect directly to my machine at a higher speed than their
> external Internet connection allows.  This interface should also
communicate
> with Internet hosts if they connect to this ifaces IP address.
>
> On to the problem...  Machines with eth0's local subnet can communicate
with
> the server without a problem.  Machines outside of the subnet - eg.
> aaa.bbb.81.36 - cannot communicate with this interface's ip address.
> aaa.bbb.81.36, as well as external Internet hosts, can however connect to
> xxx.yy.234.131 without a problem.
>
> I've tried adding routes to eth0's subnet and the larger network as a
whole
> - Only result being aaa.bb.81.36 can now connect to eth0's ip, but no
longer
> can get a response from xxx.yy.234.131
>
> Can anyone shed some light on what to do?...  My IP routing skills are a
> little lacking...
>
> Thanks in advance!...
>
> Sean
>
>
> _________________________________________________________________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
>
>



Reply to: