Re: more Have Netgear FA310TX eth0 card/trying to set apt source
BTW, I DO have networking working on one machine. NOT the one I'm using the
tulip module in but one I'm using a 3c509. In the box with the Netgear
FA310TX, the tulip module is already listed in /etc/modules but when I do
lsmod it shows 0 using it!! That must be a clue but I don't know what to do
with it.
BTW, got the 2 boxes using 3c509 running Debian using DHCP and they work
like a charm on cold boot!!! Thank you, thank you!
----- Original Message -----
From: "Kevin C. Smith" <smithkevinc@mchsi.com>
To: "Debian List" <debian-user@lists.debian.org>
Sent: Thursday, July 04, 2002 1:51 PM
Subject: Re: Have Netgear FA310TX eth0 card/trying to set apt source
> On Thu, Jul 04, 2002 at 01:15:33PM -0600, Sivea Key wrote:
> > Thanks, it's loaded and now I have a problem with dhcp not working. I
assume
> > that is because the network card driver wasn't installed so the os can't
use
> > that interface to set up the network configurations yet. So, I am
manually
> > configuring the network but would like to switch to dhcp (using a
linksys
> > BEFSR81cable router/switch with NAT) when I reboot. Suggestions?
> >
>
> Check out /etc/network/interfaces.
>
> Should have this:
> auto eth0
> iface eth0 inet dhcp
>
> Try adding:
>
> "tulip" to /etc/modules
>
> Do you have a dhcp client installed? Such as dhcp-client or pump.
>
> Also you can always restart the network interfaces by doing:
>
> # /etc/init.d/networking restart
>
>
>
> --
> Kevin C. Smith | "A Society that will trade a little liberty for
a
> smithkevinc@mchsi.com | little order will lose both, and deserve
neither."
> Debian GNU/Linux (sid) | -- Thomas
Jefferson
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
>
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: