[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Strange boot up problem.



Not sure if this is appropriate for your case but have you looked at 
the the disk option of lilo.conf (5)?


> 
> --1LKvkjL3sHcu1TtY
> Content-Type: text/plain; charset=us-ascii
> Content-Disposition: inline
> Content-Transfer-Encoding: quoted-printable
> 
> I have a SuperMicro P6DBU motherboard with built in SCSI.  All
> the drives are SCSI on the system.  I just recently bought a 80G
> IDE drive to use for storage.
> 
> The problem is that after I installed the drive the system booted
> up fine.  I have the bootup in the bios to start with Floppy
> then SCSI drives.  It worked fine.
> 
> I was adding an append for the /dev/hda in lilo and ran lilo.
> When I did it gave me an warning that the drive /dev/sda was
> not the first drive in the system.  After rebooting the bios
> said it was booting from SCSI as normal but I got the constant
> 01 01 01 01 thing.
> 
> I've tried various things like returning lilo to it's original
> configuration and the bios was not modified from when It used
> to boot fine.  I'm thinking it's a lilo confusion problem.
> 
> The way I got around this was to install lilo on /dev/hda with
> "other=3D/dev/sda" in it (the only thing in lilo.conf.hda).  And
> keeping lilo on /dev/sda to boot the system.  It works fine
> like that.  As long as I set the bios to boot from IDE primary master
> instead of from SCSI.  The problem with that setup is I can't
> boot from CDrom unless I change the bios back to booting from SCSI.
> 
> I'm just wanting to know if there are any lilo tricks to get it to
> see /dev/sda as the first drive.  Or if anyone has experience with
> the SuperMicro P6DBU Board that knows of this problem.
> 
> Thanks
> 
> --=20
> B. L. Jilek <bljilek@yahoo.com>
> PGP keys on my website --> http://crowbyte.dnsalias.com/~tcrow
> Linux user: 163800 | Debian Rules! | Slackware Rocks!
> -----------------------------------------------------------
> 
> --1LKvkjL3sHcu1TtY
> Content-Type: application/pgp-signature
> Content-Disposition: inline
> 
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.0.6 (GNU/Linux)
> Comment: For info see http://www.gnupg.org
> 
> iD8DBQE9C8EEkscAYYq6DOYRAY3rAJ0Tr3Daabf+nBPFn4AwKOwV4OEEPgCggH+0
> jezKwq6uWmu4A3XN5PJzBOA=
> =syu3
> -----END PGP SIGNATURE-----
> 
> --1LKvkjL3sHcu1TtY--
> 
> 
> -- 
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> 

-- 

    Shaul Karl, shaulka@bezeqint.n e t



-- 
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org



Reply to: