Re: Problem installing SMC 8013wc NIC
Second reply to David - now answering last 3 questions: Let me know if
you have any ideas. Thank.
Randy
>
> I'm doing some guessing, but often that works.
>
> How do you know that modprobe didn't find the card and install the
> correct
> driver?
As mentioned before, 'Install failed' message and when going to
'Configure network' step, it says, "No network interfaces found".
> What does ifconfig tell you?
ifconfig returns the following:
Link encap: Local Loopback
inet addr: 127.0.0.1 Mack: 255.0.0.0
Up loopback running MTU 3924 Metric:1
RX packets:0 Errors:0 etc. etc (everthing else=0)
> What is in /etc/modules?
'Kernal modules to load at boot time' - none showing
> What is in /etc/network/interfaces?
# /etc/network/interfaces -- Configuration file for ifup(8),
ifdown(8)
# the loopback interface
iface lo inet loopback
> And what is in /etc/networks?
'interfaces'
>
> --
> Sincerely,
>
> David Smead
> http://www.amplepower.com.
>
> On Fri, 19 Apr 2002 rh.ccm@juno.com wrote:
>
> > Hi,
> >
> > Can anyone tell me if there's another way to get a network card
> module to
> > install. I sent the following post Thursday, but got no response,
> and
> > I'm stuck. Any help would be greatly appreciated.
> >
> > I am trying to install Debian potato on an Compaq Prolinea 4/50
> with an
> > SMC network card (ISA), and am having a problem. When I go to
> "Configure
> > the device driver modules" and then to the "net -- Drivers for
> network
> > interface card..." step, it won't install the modules for the
> network
> > card.
> >
> > Here's some info from the SMC card:
> > the back of the card says, "8013wc"
> > the FCC # is JI58013wc
> > the chipset number is 83c690LJP f9411
> > When I run Slackware's Net.i utility it reports:
> > Eth0: WD80x3 at 0x300 00 00 c0 f1 00 8e
> > WD 8013 IRQ 10 shared memory at 0xd0000 - 0xd3fff
> >
> > So, I'm presuming this is SMC's 8013 series card.
> >
> > The modules that I have tried to install are "wd" and "smc-ultra"
> > (actually, I've tried all the SMC modules and a few others).
> Also, I
> > have tried to add various combinations of command line arguments
> for io,
> > irq, mem & mem_end, based on the above info reported by Net.i, but
> I
> > still get the "Installation failed" message. I've checked out SMC
> web
> > site driver page, but can only find a text file (of code) for the
> Linux
> > driver. Maybe I'm supposed to compile this into a driver file or
> > something -- I have no idea.
> >
> > I may have access to a number of these similarly configured
> Compaq
> > systems, and would like to try them on a Debian network of
> inexpensive
> > computers, so I am hoping to find a fix using the SMC card. Any
> help
> > would be greatly appreciated.
> >
> > Thanks,
> > Randy
> >
> > ________________________________________________________________
> > GET INTERNET ACCESS FROM JUNO!
> > Juno offers FREE or PREMIUM Internet access for less!
> > Join Juno today! For your FREE software, visit:
> > http://dl.www.juno.com/get/web/.
> >
> >
> >
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: