Re: Matrox G400 Hardware Acceleration
As soon as I mailed this I figured it out. I needed to compile in the
Matrox driver into my 2.4.18 kernel. I had the AGP support but no
Matrox support.
Thanks,
Mike
On Sun, Apr 07, 2002 at 09:29:10AM -0500, Michael J. Madden wrote:
> Has anyone gotten hardware acceleration for the Matrox G400 working
> under Woody. I am using XFree86 4.1.0-14 with kernel 2.4.18.
>
> I keep getting the following message in XFree86.0.log and glxinfo
> reports direct rendering is disabled.
> (==) MGA(0): Direct rendering disabled
>
> Here is my XFree86Config-4 file:
>
> ### BEGIN DEBCONF SECTION
> # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
> # Debian X Configuration tool, using values from the debconf database.
> #
> # Edit this file with caution, and see the XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)
> #
> # If you want your changes to this file preserved by dexconf, only make changes
> # before the "### BEGIN DEBCONF SECTION" line above, and/or after the
> # "### END DEBCONF SECTION" line below.
>
> Section "Files"
> FontPath "unix/:7100" # local font server
> # if the local font server has problems, we can fall back on these
> FontPath "/usr/lib/X11/fonts/misc"
> FontPath "/usr/lib/X11/fonts/cyrillic"
> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> FontPath "/usr/lib/X11/fonts/Type1"
> FontPath "/usr/lib/X11/fonts/Speedo"
> FontPath "/usr/lib/X11/fonts/100dpi"
> FontPath "/usr/lib/X11/fonts/75dpi"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "bitmap"
> Load "dbe"
> Load "ddc"
> Load "dri"
> Load "extmod"
> Load "freetype"
> Load "glx"
> Load "int10"
> Load "pex5"
> Load "record"
> Load "speedo"
> Load "type1"
> Load "vbe"
> Load "xie"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc104"
> Option "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> Option "CorePointer"
> Option "Device" "/dev/ttyS0"
> Option "Protocol" "Microsoft"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
> Identifier "Generic Mouse"
> Driver "mouse"
> Option "SendCoreEvents" "true"
> Option "Device" "/dev/input/mice"
> Option "Protocol" "ImPS/2"
> Option "Emulate3Buttons" "true"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Device"
> Identifier "MGA"
> VendorName "Matrox"
> Driver "mga"
> Option "AGPMode" "1"
> VideoRam 32768
> EndSection
>
> Section "Monitor"
> Identifier "Generic Monitor"
> HorizSync 30-94
> VertRefresh 50-75
> Option "DPMS"
> EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "MGA"
> Monitor "Generic Monitor"
> DefaultDepth 16
> SubSection "Display"
> Depth 1
> Modes "1280x1024"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1280x1024"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1280x1024"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1280x1024"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1280x1024"
> ViewPort 0 0
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1280x1024"
> EndSubSection
> EndSection
>
> Section "ServerLayout"
> Identifier "Default Layout"
> Screen "Default Screen"
> InputDevice "Generic Keyboard"
> InputDevice "Configured Mouse"
> InputDevice "Generic Mouse"
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
> ### END DEBCONF SECTION
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: